stuartcross

Would anyone be interested in buying my Yeti 303 DH special projects frame number 81/100 would come with a Chris King headset, Hope (I think) BB, Thomson seatpost and also some 2005 Fox 40's, they have one snapped bolt that holds the axle but this does not effect them at all. I have recently stripped the bike, stripped the carts also, greased all bearings and waxed the frame. I’ll also throw in some spare rails and numerous bolts / bearings. It has the usual chips wear etc but is still in great condition, the drive side has chain slap marks but this is to be expected, the frame was like this before I got it almost 10 years ago to which I wrapped it. Also has the new dog link fitted too which looks much better. This bike rides great, a proper piece of Yeti history and an exceptional piece of engineering. Built up or not it looks superb, would look great on a wall too.

These are Hope Pro II hubs on DT Swiss FR600 rims with tubes and also good Maxxis Minion DHF tyres on front and rear. The front axle is a bolt through 20mm but can be converted to 15mm etc and the rear is a bolt through 15mm x 142 I think but this can also be converted. Also comes with the 10 speed XT cassette you see pictured. Good wheels with the rear one having a few small dents in the rim but they are not bad and do not effect the performance. Grab a bargain as the tyres are worth almost £80 alone. Came off my DH bike so haven't seen much use as it only got used 10-15 times a year. And I will clean them for that too.

Custom Yeti Leatt Med / Large Custom painted team colours, I've stepped away from DH so no longer need it. I have all instructions and relevant adapted to ensure the best fit. Can easily be repainted if not taste. Open to offers

2013 / 2014 Yeti SB66 Alloy in Medium fitted with a Fox Float X shock custom tuned med / firm / med (1 year old) bike has just had all the bearings replaced so is smoother than a smooth thing! Spec as follows Fox float 34 kashima forks CTD 160mm Chris King headset Thomson 50 mm stem Enve carbon AM bars ODI ruffian grips XTR clutch mech 10 speed 2013/2014 (few marks) XTR 10 speed shifter XTR crank with E13 34t ring XTR BB E13 LG1 chain guide XT 11-36 cassette KMC X10 chain XT M785 brakes front and rear XT RT86 discs 160 / 180mm Thomson dropper post (replaced 10 months ago under warranty) KS southpaw lever under bar Limited edition WTB Yeti 25th anniversary seat (only available on 575 25 anniversary bikes or team issues) (may keep this) Chris king hubs 20mm axle up front Standard rear quick release with XTR QR. ZTR Flow EX tubeless rims with custom decals Brand new Maxxis minion II 2.3 rear tyre, ridden twice Brand new Maxxis Minion DHF 2.5 ridden 5 times up front The frame has been invisi wrapped from new and has a few rub marks but these are on the wrap as opposed to the frame. The frame does have a few marks and chips on it but given its age and what these bikes get used for it is minimal. I look after my bikes and they are regularly serviced and keep running well. Only selling this fine stead as I am upgrading to a newer bike, the build on this cost me well in excess of £4k 1 1/2 years ago. All you need to do is ride it and enjoy it as everything is in great working order. I'll even throw in 2 Nobby Nics I have spare also. I was considering breaking the bike and might still but would rather sell it complete if I can. I have tried to be as honest with the condition of the bike as possible hence all the pictures but as you can see it is all cosmetic, the chainguide is cracked as you can see but works perfect and isn't an expensive fix. Looking for £1995 and that as you know is an absolute steal, it would break for more than that. (Pedals not included)