Posted in "New Whyte S-150: Paint delamination!"
Nov 11, 2019 at 12:10Nov 11, 2019
Jul 9, 2019 at 12:45Jul 9, 2019
Used once, I have wonky feet and these sit slightly too close to the crank for me! Nukeproof Horizon Pro Flat Pedals The Nukeproof pedal range has been extensively engineered to offer the optimum balance of strength and fatigue resistance with minimum weight penalty. Designed in conjunction with 5-time downhill world champion Sam Hill, we have created a flat pedal that incorporates a large platform, adjustable pins and angled faces to aid deflection from obstacles. Each pedal body spins on high quality DU bushings with 2 sealed cartridge bearings to help spread the stress loads from heavy impacts. Meanwhile a lip seal between the axle end and pedal body helps to reduce ingress of water and dirt prolonging pedal life between services. With all of the features seen on the Horizon Sam Hill, but in a much more stealth package with a black ano platform including subtle laser etch graphics and accompanied by black adjustable pins.
May 31, 2019 at 13:29May 31, 2019
Nukeproof Horizon Stem 31.8 bar diameter 35mm length Used once while deciding on stem length for new bike.
May 10, 2019 at 9:55May 10, 2019
Very lightly used whilst dialling in the correct spring rate. £39 2.25 x 400
Aug 14, 2018 at 13:43Aug 14, 2018
Sram Guide R brakes. MMX Bar clamps not included. Probably need a bleed as removed from internally routed frame. Supplied with pads with some life left.
Aug 14, 2018 at 13:39Aug 14, 2018
Some scuffs on decals, one flat spot as per the photos, but it's a nice strong wheel and fully UST. 142x12 XD driver.
Aug 14, 2018 at 13:24Aug 14, 2018
Front is in good condition, no major dings just a few scratches to paint, rear has more wear and tear, one notable ding/flat spot as shown on the photos, still holds air and runs fine. Front: 29mm internal. WTB 2.0mm, Black Sandvik Stainless Steel Spokes, Brass Nipples. Alloy, Double Sealed Cartridge Bearing, 15mm X 110mm Boost Through Axle, 32 Hole Rear: 29mm internal. WTB 2.0mm, Black Sandvik Stainless Steel Spokes, Brass Nipples. Whyte Cartridge Sealed Bearing, 12mm X 148mm Boost Through Axle with Micro Engagement 6 Pawl XD Driver Free Hub, 32 Hole.
Aug 2, 2018 at 10:06Aug 2, 2018
https://www.bike-components.de/en/BikeYoke/4-Bike-Yoke-for-Enduro-27-5-2015-2016-Models-p50578/ Lets you use standard shocks on previous generation Specialized Enduro's. This version is 'intended' for the 650b, but I used this on my 2015 Enduro 29 with a 200x57 shock to slacken it out.
Aug 2, 2018 at 9:56Aug 2, 2018
This was a spare shock from my previous bike and requires some TLC, was losing air gradually last time I used it, so probably a seal kit required. Scuffs / scratches around eyelets & air can but the actual shaft is in good condition. All adjustments including the climb switch are working. Great shock, so a good little project for someone.
Nov 17, 2017 at 7:06Nov 17, 2017
Fox Transfer post, 125mm drop, 30.9 diameter, internal routing. Good condition, stanchion is immaculate, usual marks around seat rail clamps but nothing out of the ordinary. 1x Under bar remote included.