teamteddies

This bike has the Bosch motor. It also has a couple of upgrades: the first is a Rockshox reverb seatpost, and the second tubeless tyres. The original tyres and tubes will come with the bike. The tubeless tyres do need to have the gunk in the tyre changed. It is a good reliable bike that has been looked after. Three months ago it had a new cassette and chain fitted and a new Sram chain is also comes with the bike. This bike is on the market as I have bought a new carbon ebike.

This bike was a well-loved dream when I retired. At the time it was the top of the range with a superb light weight carbon fibre frame and high end spec. It cost me marginally under £4000 and was ridden with respect and pride as I’d gone beyond charging down mountain tracks. I am now entering the e-bike era so my dream bike has to go. With few exceptions I have maintained the bike to original spec. As far as I am aware the only upcoming replacement is the cassette. The spare wheel with road tyre was for use on a trainer. Frame Lightweight carbon fibre Forks Fox 32 Float Rear Shock Fox Float RP23 Headset FSA Orbit, Sealed Cartridge Bearings Rear Hub Easton EA-90 QR12mm Front Hub Easton EA-90 QR15mm Spokes Easton EA-90 Rims Easton EA-90 Tyre Front Maxxis Ardent 26x2.25 Tyre Rear Maxxis Crossmark 26x2.10 (nearly new) Shift Levers SRAM XX, 10 Speed Front Derailleur SRAM X-0, 10 Speed Rear Derailleur SRAM XX Long Cage Cassette SRAM XX, 10 Speed 11-36T Chain SRAM 10 Speed PC1071 Crankset SRAM XX 10 Speed Bottom Bracket Ceramic Seat post Rock Shox REVERB Saddle WTB Bar Easton Carbon Stem Easton Brakes Front and rear Avid Elixir 9 Rotors front - Hope 180 rear - Hope 160 Pedals SPD’s (not in picture) ALSO Easton EA70 wheel with SRAM PG1030 cassette 10 Speed 11-36T and Schwalbe City Jet tyre 26x1.95 unused on road Cateye wireless computer 2 spare sets of brake pads Original SRAM rotors with plenty of wear left (one on EA70) Tubeless conversion valves New SRAM 10 Speed PC1071