tearus

Raceface Next R Carbon Crankset - 175mm arm length - boost spacing - $125 plus shipping/fees - no chainring Shimano XT FC-M8100 Crankset - 175mm arm length - was setup with a 55mm chainline - $45 plus shipping/fees Open to reasonable offers - willing to trade for crankset with 165mm arms

2025 Waltworks Custom Rigid Fork - atc: 498mm(120mmish suspension corrected) - water bottle and cargo mounts on each blade, boost spacing, fits 2.6 tires (could probably go bigger), IS brake mount, sapphire peacock powder coat - 51mm, straight 1 1/8 steerer tube @ 9” - $300 SOLD 2021 Fox 38 Performance Elite - Grip 2 - 170mm - 44mm offset, 7.5” steerer tube - 2 rides on a fresh service - $400 SOLD 2017 Rockshox Pike - RCT3 - 130mm - 51mm offset, 7 5/8” steerer tube - pulled off a bike that wasn’t ridden much - $200 SOLD 2021 Marzocchi Z2 - Rail - 130mm - 44mm offset, 7” steerer tube - barely ridden - $130 SOLD Cotic Alpaca Fork - $165 - no orange bolts or brake adaptor included - specs: https://www.cotic.co.uk/product/alpaca?srsltid=AfmBOootlMEvyodY58fzkmPGvUFB5oyTvHCVk3AFaf2AJkCPX1-Ai6Ia#fork Open to reasonable offers. Will ship using bikeflights. Buyer pays shipping and payment fees. Holler if you have any questions.

Rode this for a awhile and found it to be too soft. Make an offer. I also have some ext springs in another post.

Low hours on a 240mm dropper post. Trying to sell off the parts bin.

Used Hope Tech 3 master cylinder and v4 caliper. No hose. Costs $20 to $30 for a new one. Open to reasonable offers.

2023ish EXT Storia V3 - 8.5”x2.5” or 216mm x 63mm - had it on my v2 starling murmur to increase travel with no issues (peeled off sticker), maybe 5 rides plus a few from the original owner, 425 and 450 springs - $350 plus shipping/fees 2020ish Rockshox Super Deluxe Ultimate - 210 x 52.5 - used it on a santa cruz hightower for half a season then sold frame with original shock, stanchions are perfect, one mark on sticker - $125 plus shipping/fees Looking for a paul boxcar stem 22.2 x 35mm.

Hope Tech 3 Silver Master Cylinder (Right Lever) with a black E4 caliper. Could probably use a bleed. I needed the pads for a different bike so none are included. Open to reasonable offers. Buyer pays shipping/fees.

Rode this for a awhile and found it to be too soft. Make an offer. I also have some ext springs in another post.

Previous owner installed it without a bearing cap and wore down the aluminum a little bit. I sanded it, slapped the end cap on there and ran it for a summer without any issues. Asking $75 plus shipping and fees. Or just make an offer. Fits V2 Hightower frames (2019-2021) Travel: 150mm (with stock 210x52.5mm shock) Travel: 160mm (with stock 210x55mm shock) +5mm chainstay length Sealed Enduro MAX bearings 8mm x 30mm eyelet spacing 6061-T6 Aluminum Colors: Black Weight: 298 grams