tldrigg

I am selling my Lapierre size Large 55cm. I have ridden this bike exactly 101 miles. It has just been sitting in my garage and it is time to sell. It is in perfect condition. When I bought it I upgraded the Saddle, Seatpost, Stem and Bars. The pedals are included. (Time Xpresso 6) Extra set of cleats Carbon Cages High pressure tire pump Lazer Genesis helmet. Lazer Magneto sunglasses Pearl Izumi size 47 road shoes Frame: PULSIUM CARBON, 40T,30T & 24T mix of modulus grades Fork: LAPIERRE PULSIUM CARBON - Carbon Steerer & legs 50mm Offset Headset: FSA 1"1/8 1"1/4 FSA ORBIT C-33 CF 44E 15 mm Carbon Top cover Bottom Bracket: SHIMANO PRESSFIT Crankset: SHIMANO ULTEGRA 50x34 175mm Stem: ZIPP Service Course 6° DIA:31.8 120mm UPGRADED Seatpost: Specialized CG-R Carbon Seatpost UPGRADED Handlebar: S-Works Aerofly II Carbon Handlebars Front derailleur: SHIMANO ULTEGRA Di2 Rear derailleur: SHIMANO ULTEGRA Di2 11-SPEED Shifters: SHIMANO ULTEGRA Di2 11-SPEED Brakes: SHIMANO ULTEGRA UPGRADED Saddle: FIZIK Wheelset: MAVIC KSYRIUM EQUIPE WTS Cassette: SHIMANO ULTEGRA 11-SPEED 11-32T UPGRADED Tires: SCHWALBE ONE

These bares are in perfect condition. Only rode them a hand full of times. Buyer pays freight and PayPal Thanks Super Six Alloy Ø31.8mm Rise: 30 mm Length: 800mm Geometry: 4°Up / 8°Back Dual XGT Taper with Impact Ends

Have ridden these wheels just a handfull of times. There is no damage and they are true. I have an XD driver that I will throw in if you need it. This sale includes the Schwable Magic marys also. They have lots of tread on them and are set up tubeless. Buyer pays paypal fees and freight. Thanks, Enigma 27.5 front wheel 20mm (~990g) Enigma 27.5 rear wheel 157x12mm (~1130g)

NS Bikes Direct Mount Stem I had this on my M16 for about 3 months. Perfect condition. Buyer pays paypal and freight The DH Direct Mount stem, precision CNC machined from quality AL 6061 T6. Features a very wide split design. It's lightweight, super stiff. Compatible with RS Boxxer, Marzocchi, Fox. The plus 180 degree clamp is designed to be threaded onto the handlebars from the sides, making the installation process easier. The adjustable reach has two positions: 43mm and 50mm. Features: Material: 6061 T6 Alloy - full CNC Compatible with: RS Boxxer, Marzocchi, Fox fork crowns Two positions allowing to choose reach: 43mm/1.7” or 50mm/2” Rise: 6mm/0.2” Front clamp with 2 x M6 bolts with 6mm Allen hex sockets – strong & light. Weight: 123g (w/o fork crown-bolts)

This stem has one ride on it. I have a Race Face Sixc green available also for 100.00. http://www.pinkbike.com/buysell/1854084/ Stem: Bar Clamp Diameter (mm): 35.0 mm Color: Black Defined Color: Black Length: 70 mm S.H.I.S. Stem Clamp Diameter: 28.6 Stack Height: 40 Stem Angle (deg): 0 deg Weight: 143 g Bars: DIMENSIONS: 800mm width, 8° rearward, 5° upward RISE: 20mm WEIGHT: 210g BAR DIAMETER: 35mm

These bars have one ride on them. They are in perfect condition. Asking 100.00 with Easton Haven Stem 150.00. Bars: DIMENSIONS: 800mm width, 8° rearward, 5° upward RISE: 20mm WEIGHT: 210g BAR DIAMETER: 35mm Stem: Bar Clamp Diameter (mm): 35.0 mm Color: Black Defined Color: Black Length: 70 mm S.H.I.S. Stem Clamp Diameter: 28.6 Stack Height: 40 Stem Angle (deg): 0 deg Weight: 143 g

This case was on my phone for about two months and I got a different case. This is in great condition with a little wear on the back of case from the little use it got.

This gear was never worn. It was tried on and the upper arm stitching by the shoulder ripped. It just got tossed around in the garage for a few months until I had a seamstress sew it up. It is a labeled an XL but it is mislabeled. If I had to guess I would say it is a medium to large. It is in perfect working condition. The picture shows were it was repaired. Feel free to make some offers.