tomholland747

Okay so first off this is a listing for the front wheel only, I ha e the rear one too but the rim has a crack as pictured but somehow still holds air. The £200 gets you the front wheel and I'd happily include the rear for free as can't in good conscience sell it. These are boost so 110x15 and 148x12 with 6 bolt disk mounts and a hg freehub body. Rear bearings are a little worse for wear but the fronts are smooth as. I've had trouble with the front hub bearings not lasting more than a month so it now has high grade ones in there (like £30 each) and they're still silky smooth after 18 months so bear that in mind for once they do wear out. 40mm internal so suit 2.8"-3.2" tyres, gives a lovely ride. Comes with the tyres as shown, tubeless, good tyres but worn. Light weight and stiff gives a playfully live feel with tones of grip. Would absolutely recommend for taking the sting out of a rigid xc mtb setup. Any questions please just ask Will post at buyers expense but regularly go to Bristol so could also deliver for most of the sw for a few quid of fuel

Onza ibex 2.4 29" nearly new still goes tubeless fine Good winter xc/light trail tyre

Fox dpx2 210x55 performance Off a forbidden druid selling as I upgraded to coil and forgot to get rid of this its been sat in a box for a while Has had regular air can services while I was riding it each 6 months but I've never had the damper serviced. No issues tho I have a volume spacer kit and seal kit I'll throw in too. 5th volume spacer is in the shock. Has the 8x30mm hardware on it both ends, bushings still good. I have the tool to properly remove then if you'd need to change it and don't have the extractor. Any questions just ask

2019 sram guide rsc Replacing as I happened to have a spare set of codes hanging about Good bleed currently Pads pretty worn but still functional Clean and cared for well Expected scratches etc but functional Any questions just ask

Raceface turbine bars and stem of a 2019 bike 760mm 50mm stem 35mm clamp Any questions just ask

Pacenti xd freehub body basically new 54t For 12x148 With spacer and end seal Probably fits many hubs if you find the ones that are the same oem part, it's the bitex 54t hub