tomtomr

Specialized 29er boost wheelset. Taken off a new Specialized Enduro before use XD freehub. Front hub has torque caps (for Rockshox forks) Can be collected from Peak District or will post for £9 Rims Specialized 29, hookless alloy, 30mm inner width, tubeless ready Front Hub Alloy, sealed cartridge bearings, 15x110mm thru-axle, 28h Rear Hub Alloy, sealed cartridge bearings, 148mmx12mm thru-axle, 28h Spokes DT Swiss Industry

2021 Orange Stage Evo frame size large in matte charcoal grey with: Rockshox Super Deluxe Ultimate shock Cane Creek 40 headset Owned from new, purchased  in October 2021. Frame is in good condition overall with a few small paint chips around the bottom of the down tube (pictured). I've left the outer cables installed to help the buyer with the internal routing. Will be sent insured next day tracked delivery for £40 or can be collected from the Peak District The Fox Elite Transfer 30.9 seatpost with dropper lever (175mm drop) and Hope Tech 3 E4 brakes (203mm front mount and 180mm rear mount) can be included at additional cost - let me know if you're interested in these.

Yeti Arc C1 2021 size large Purchased new in January 2021, the bike has only been ridden for 455km due to injury and then moving away from hardtail riding as a result. Frame is fully helitaped from new and in excellent condition with no dents or cracks and everything is working as it should. There one small mark high on the left fork stanchion (see fourth photo), some small marks to the helitape on the downtube and the helitape on the downtube has been creased by the weight of my secuty chain pulling on it (see fifth photo). These are marks to the helitape and not to the frame itself. Bike can be collected or will be posted insured with Paisley Freight for £70 (Pedals in photograph not included in sale) Components are as original spec except bar, stem and grips Fork FOX PERFORMANCE 34/130MM Head Set CANE CREEK 40 INTEGRATED Stem Thompson Elite 50mm Handle Bars Giant 780mm x 15mm rise Grips Strange Grappler Lock-On (new) Brakes SHIMANO DEORE 2 PISTON Rear Derailleur SHIMANO SLX 12 speed Shift Levers SHIMANO SLX 12 speed Cassette SHIMANO SLX 10-51 12 speed Chainset SHIMANO SLX 32T 170MM Wheels DT SWISS M1900 30MM Front Tyre MAXXIS MINION DHF 2.6 EXO Rear Tyre MAXXIS REKON 2.6 EXO Saddle SILVERADO CUSTOM Seat Post FOX TRANSFER 31.6MM / 175MM

Sprindex Adjustable Coil Spring 55mm/2.2” Stroke 430-500lb Range adjustable by turning the collar Supplied in box with all adaptors

Deviate Highlander frame with 150mm linkage Supplied with: 2021 Rockshox Super Deluxe Ultimate RCT Coil shock (M/M tune as recommended by Deviate) Rockshox 500lbs coil spring OneUp underbash bashguard Seatclamp Spare deralleur hanger, manual and various other spares (cable entry ports, bottom bracket spacer, spares for bashguard) Frame was purchased new from Deviate in January 2021 and shock in July 2021. The frame was fully helitaped from new. There are some cosmetic marks from use (mainly to the helitape) but no dents or cracks on the frame. Frame will be boxed and posted by Paisley Freight with full cover for £60, or can be collected. I am also selling a Sprindex adjustable coil spring (430-500lb range) suitable for the frame - see my other listing.

Raceface Affect R handlebar 760mm wide, 20mm rise 35mm clamp size Removed from new bike before use

Ibis Ripmo AF frame, size large. 147mm of rear travel from a DVO Topaz T3 air shock with external rebound and 3 compression settings. I always rode the bike in the open mode as the DW Link suspension provides a great pedalling platform whilst generating great traction through the rough stuff. The shock can be tuned with clip on volume spacers in both the positive and negative chambers. At present there are 2 in the positive and one in the negative chamber, which is how the shock comes supplied from Ibis. Frame was purchased new in February 2020 and shock was new in November 2020 (replaced under warranty). At the same time as fitting the new shock I stripped and regreased the lower linkage bushings and these and the bearings are all working with no play. There are some cosmetic chips to the paint in places (pictured, mainly on the lower part of the downtube) however there are no dents or cracks. Most of the frame was covered in protective helitape which I have now removed. The downtube has an adhesive rubber protector from a Kona Operator, which is a great fit. Supplied with the following spares: Spare derailleur hanger Removable ISCG05 mount 2 spare volume spacers for the shock One set of lower linkage bushings

Shimano SLX M675 brakeset Front hose length 82cm, rear hose 142cm Pads are relatively new so there is still a decent amount of life left in them

SRAM NX 1x X-Sync GXP Crankset 175mm crank length 32 tooth chainring Unused - removed from new bike. Supplied without GXP bottom bracket