tradclimber

A regretful sale as I am the original owner and had to wait nearly 2 years for this beauty…but it has been in storage box for a couple of years as I consolidated this and a gravel bike into a single bike, so have not touched this frame after stripping the components (Campagnolo full Super Record) and deep cleaning. Paint is the rare Muhammad Ali and Dr. Martin Luther King scheme in gorgeous Orange. If you have not ridden a Pegoretti before, you do not know what you are missing in terms of the geometry and handling / performance. Frame comes with the upgraded Falz fork (originally did not come with a fork as there was a shortage of the Reynolds Ouzo Pro Fork), so when I got the frame I found-out that I had paid the normal price and literally had no fork! True story. So I ran a Colnago straight blade carbon fork until the Falz came-out then I swapped it out. Size is a standard 57cm center-to-center geometry. For details on the frame measurements, please see the attached image straight from Pegoretti. Included are: * A rare Campagnolo ball bearing headset (1 1/8” threadless). * Parlee carbon fibre front derailleur clamp. * Spare derailleur hanger (had to be special ordered from the North American distributor)…but if you ever need it, you will have one! Frame has been meticulously maintained and had significant clear protective tape (no longer in place) and has been deep cleaned and waxed. According to Strava, which Strava is alway right and the absolute truth of all that is human performance (LOL !), I only rode it for 3,103kms / 1,928 mis. I am also not a big guy….82kgs / 180lbs and no falls on this beauty…just pampering. Overall condition in our view is a solid 8 / 10, but please review the photos as everyone’s view may be a bit different. Pictures show all aspects of the frame. Note that we have no components for this bike.

I am the original and only owner of this great and bomb-proof Yeti SB-95A. All bearings were replaced by Rock City Cycles in Nanaimo, with some additional new bearings provided (I had 2 rebuild kits). Frame is in very good condition with photos capturing all aspects of the frame. This frame is made out of aluminum and can take a beating, unlike the carbon version of the same frame. Note the Yeti touch-up paint is NIB, and we did not touch-up the frame at all. There is also heavy duty down tube and sides of the head tube protective taping, which we have left in place. Extras included: - Yeti factory touch-up paint - Yeti factory extra bearings - Original quick release chips - Original quick release Seatpost clamp - Original ISCG mounting hardware - E-Type front derailleur custom “fang” to ensure no dropped chain stuck - K-Edge chain catcher Link to the Yeti manual: https://yeticyclescom.cdn.prismic.io/yeticyclescom/89422534-1695-4621-92b2-db628267b2a5_2013_OwnersManual_SB95A.pdf