whatyadoinsucka

Buyer to collect or can ship within U.K. , cannondale topstone 105 carbon 2020 gravel bike. Size Large Viewing essential, Please do not make payment if you cannot collect, please get in touch before wasting mine and your own time Bike has had check over at local bike shop for some TLC, new cables and bar tape fitted and a re-indexing of the gearing, and a check of brakes and re-bleed As per factory spec, except - Upgraded to fancier Shimano rotors - USE (exposure) carbon post and fabric branded carbon rail saddle - panaracer gravelking SK 700x38mm tyres (tubeless) - New black bar tape fitted (tempo microtex bondcrush black) — quadlock and pedals not included New headset bearings and bottom bracket mid summer 2021 Some signs of wear and tear, levers have a few marks as does the top tube, a few scrapes heavy marks around the bottom bracket, I managed to buckle the inner chainring and de-threaded the spider, which created some scrapes in the carbon around the bottom bracket, and the inner alloy crankarm, hence in late august/sept 2021 new spider, 2x chainrings, kmc chain, pulley wheels and cassette fitted . Gears reindexed and cables (inner and outer) changed, new black bar tape fitted, brakes bled Great bike, owned since September 2019, rides well on and off-road , slightly flared handlebars for a fun ride, 46t/30t crankset with 11-34t cassette, so can maintain a good speed on tarmac (25-27kmph) but is a beast on the climbs. A great bike that with slimmer road tyres I managed Madrid to Windsor 435miles in 4 days (excl ferry) keeping up with regular road bikes happily buyer to collect, will not ship. Advertised elsewhere ----- geometry and original spec as below link https://www.cannondale.com/en/bikes/road/gravel/topstone-carbon/topstone-carbon-105

Canyon Nerve 2016 aluminium frame size medium in skydive blue, It was QR but I bought the canyon kit and Converted the rear axle to 142x12mm canyon thru axle Raceface aeffect crank, 32t green cinch, 11-46t Xt cassette, Xt m8000 Derailleur and kmc x11-93 chain (11 speed) Hope bottom bracket (ceramic ball bearings) Hope Headset, raceface next carbon bars 31.9 x 730mm (I think) with race face half nelson grips XTR 11 speed shifter attached to brake levers Xt m8000 brakes & icetech rotors Canyon stem and seatpost, fabric scoop saddle , hope clamp Rockshox Reba 120mm air fork 9mm QR // 120mm rear suspension rockshox shock Hope pro 4 straightpull spoke hub enduro wheels (silver hubs) (includes spare spokes, adaptor caps for QR rear and front 100x15mm) - rear wheel runs straight but a few dings in the rim Specialized purgatory 27.5x2.35 tyres (rear is one ride old) Booklets and spare derailleur hanger etc. Good condition but with some chips to paintwork and a small scrape on non drive side rear triangle These pictures are taken a few weeks ago after I had cleaned it up for a test ride, since the pictures I have removed the peeling plastic coating on the top tube and also removed the peeling Reba stickers.. main change is I have switched the cinch chainring to a green 32t as per last picture pedals will throw in some DMR V12s flats or the shimano SPDs currently on