wheelbreaker180

My wife rode this two times and then broke her leg skiing. Not going to be using it this year so we are selling it. It is in mint condition as it has only been ridden twice. It is stock except when she picked it up she had the handle bar cut to 765mm by the shop when they built it for her. She did have the shop put on a maxxis forekaster on the front and a maxxis rekon on the rear, but we would sell it with the original tires (Specialized Butcher front, Specialized Eliminator rear) Link to site: https://www.specialized.com/us/en/s-works-stumpjumper-15-sram-xx-axs-fox-factory/p/4221406?color=5366727-4221406 Size S1 Frame FACT 11m carbon chassis, rear-end, and link, Trail Geometry, SWAT™ Door integration, head tube angle adjustment, threaded BB, internal brake and dropper cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, SRAM UDH compatible, 145mm of travel Seat Binder Alloy, 38.6mm Rear Shock FOX FLOAT Factory with Specialized GENIE Shock Tech, Ride Dynamics Trail Tune, 2-position lever w/3 setting Open mode tuning range, LSR adjustment, S1:210x52.5mm, S2-S6:210x55mm Fork FOX FLOAT 36 Factory, GRIP X2 damper, HS and LS rebound and compression adjustment, 15x110mm QR axle, 44mm offset, S1:140mm of travel, S2-S6:150mm of travel Front Brake SRAM Maven Ultimate, 4-piston caliper, hydraulic disc, 200mm HS2 Rotor Rear Brake SRAM Maven Ultimate, 4-piston caliper, hydraulic disc, S1-S2: 180mm, S3-S6: 200mm HS2 Rotor Shift Levers SRAM AXS POD Ultimate Controller Rear Derailleur SRAM XX Eagle Transmission Derailleur Cassette SRAM XX Eagle SL Transmission Cassette, 12spd, 10-52t Chain SRAM XX Eagle SL Transmission Flattop Chain Crankset SRAM XX Eagle Crankset, 32T ring, Integrated Guard, 55mm Chainline, S1-S3:165mm, S4-S6: 170mm Bottom Bracket SRAM DUB, BSA 73mm Wide, Threaded Rims Roval Traverse SL II, hookless carbon, 30mm inner width, tubeless ready, 28h, Front: 29, Rear: S1-S2: 27.5, S3- S6: 29 Front Hub DT Swiss 240, 15x110mm, 28h Rear Hub DT Swiss 240, 12x148mm, 28h Spokes DT Swiss Aerolite Front Tire Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3" Rear Tire Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 2Bliss Ready, S1-S2: 27.5x2.3, S3- S6: 29x2.3" Inner Tubes Standard, Presta valve Stem Deity, 35mm clamp, 35mm length Handlebars Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, S1-S2: 780mm: S3-S6: 800mm Grips Deity Lockjaw Saddle Power Pro Mirror, Hollow Ti rails, S1-S2: 155mm, S3-S6: 143mm SeatPost RockShox, Reverb AXS, 30.9, S1: 125mm, S2: 150mm, S3-S6: 170mm

Ridden once https://www.specialized.com/us/en/s-works-stumpjumper-15-sram-xx-axs-fox-factory/p/4221406?color=5366727-4221406 This exact bike in a size S4

2016 Patrol Carbon Size Large Saddle: Anvil Handlebar: Raceface Atlas Stem: Race Face Atlas Mud Guard: Tire Fire Grips: Burgtec Brakes: SRAM Maven Bronze (new) Shifter: Sram XO1 Dropper Post: LES Fork: RockShox Pike 160mm Shock: RockShox Monarch Plus 155mm Cranks: Shimano Deore XT Derailluer: SRAM XO Drivetrain: 1x11 Front Wheel: Easton AR30 with Maxxis DHF 27.5 x 2.5 (new) Pedals: Crank Bros Stamp Rear Wheel: DT Swiss XM481 with Hope Pro 40 Hub with Maxxis DHF 27.5 x 2.35 **Front fork and rear shock serviced a few months ago Brakes: used once (new levers, calipers and rotors)