williswillis

Up for sale is a lightly used Fox Float X2 in 230x57.5mm dimensions. It came off a Trek Slash but I was mostly running different shocks on that bike. Just been sitting in a bin collecting dust so I’m pricing this the same as some other Elite and Performance models even though it’s Factory to get it moving. Let me know if you have any questions. PayPal only, UPS ground shipping included to lower 48 US. Shipping beyond that would be on the buyer. Dimensions: 230x57.5mm (I think the stroke spacers can be removed to make it 60mm but not 100% sure there). Upper eyelet: 60mm x 10mm Lower eyelet: 50mm x 10mm Thanks for looking!

Up for sale is a new Shimano Saint M825 downhill drivetrain with everything but the chain. These parts were mounted to a bike briefly, but never ridden. Photos show lack of wear. Includes everything shown here and other than the chain is a complete drivetrain. - M825 Saint DH Crankset, 165mm length, with 83mm bottom bracket width & spacers, and 36 tooth ring - M820 Saint Shifter, includes a cable - M820 Saint Rear Derailleur, includes adapter piece to run wider gear range (trail) - CS-6700 Ultegra Cassette, 11-25 tooth cogs - MRP Mega G3 Carbon, 36-38 tooth, ISCG-05, includes bolts Price includes UPS Ground shipping within the continental US, for any other shipping service there would be an upcharge we can discuss. PayPal only. Thanks for looking and message me with any questions!

Up for sale is a used but well-loved Slash 9.9 extra-large frameset with lots of replacement parts, from a 2019 bike. It was awesome, and still is, but I put all the parts on the new Top Fuel and I’m having a blast on it, so sadly it’s time to let this frame go. There are a few paint chips that I tried to capture in the photos, but overall, this is in great shape and ready to rip once built back up. Extras included are a spare Fox EVOL shock, Bontrager 150mm Line Dropper post & collar, the KnockBlock headset assembly, stem, and spacers and spare suspension hardware (I don’t have spare bearings, but these were replaced in 2020 and are still spinning great). I had also picked up a spare rear end to have on hand as a spare set, and though it’s not a complete paint match (you can kind of see in the photos, hues are slightly off), they’re included for you. The replacement chainstay is aluminum though. Lastly, I left cables running through the brake, RD, and dropper routing ports to make reassembly easy for you. PayPal only, please message me if interested or if you have questions. Price is firm at $1400 as it includes all the extras and I’m also covering UPS Ground shipping to the continental United States in my posted price. Shipping is not included for any expedited or international shipping though. Frame: Trek Slash 9.9 2019 Size: XL Travel: 150mm Rear, fits up to a 170mm front Installed Shock: RockShox Deluxe RT3, DebonAir spring, RE:aktiv with Thru Shaft 3-position damper, 230x57.5mm Spare Shock: Fox Performance Float TS9 EVOL, RE:aktiv with Thru Shaft 3-position damper, 230x57.5mm Seatpost: Bontrager Line Dropper 150mm Here is a link to the 2019 bike on trekbikes.com if interested in the original specs: https://www.trekbikes.com/us/en_US/bikes/mountain-bikes/trail-mountain-bikes/slash/slash-9-9/p/575888/

Up for sale is a set of Bontrager Line Pro 40 wheels in excellent condition, circa 2017. Ridden for just a few rides, hardly any wear on the rims at all. Valves and tape are installed to go tubeless right out of the box. Price is firm at $550, that’s the going rate for a replacement rim only from Bontrager currently, so this set is priced to move. Paypal only, and UPS Ground shipping is included in the price for the continental US. For anything expedited or international, shipping is not included but can be discussed of course. Specs: Wheel size: 29 (29+ capable) Hub spec: Boost 110 front, Boost 148 rear Freehub: SRAM XD only (Shimano exists, but is not included here) Rotor mount: 6-bolt Rim width internal: 41mm Rim width external: 46.5mm Color: Mostly carbon, with grey logos and red patches

Hello! Trails are starting to dry out, and Phish summer tour is on sale, let’s goooooo! Up for sale is a well-loved and very very well cared for but no longer needed 2018 Rock Shox Yari 29/27.5+ 130mm travel fork. Serviced March of 2021 with new dust wiper seals, 100 miles of riding since. Immaculate upper tubes, only real scratch to speak of is on the lowers is on the crown in photos, comes with spare air shaft cartridge which should convert it internally to 120mm, air volume tokens, spare angular contact headset bearings, brand new crown race (already installed), and Bontrager Line 35.0mm 50mm length stem and matching top cap. Steer tube length is 176mm, just under 7 inches. $300 price is firm. Stem/bearings/extras are freebies, no discount for their exclusion. Firm price includes everything shown in images, plus UPS Ground shipping to continental US, guaranteed shipped within 2 business days. For further or expedited shipping, costs will be added but discussed transparently in messages. PayPal only. Local pickup ok but PayPal still required. Specs: Brand: Rock Shox Model: Yari RC (crown multi-point compression adjustment, rebound lower knob) Submodel: SoloAir Year: 2018 Wheel Size: 29 or 27.5+ (29x2.5”, or 27.5x2.8” max tire size, guestimates) Axle: Boost 110x15mm Travel: 130mm Stanchion diameter: 35mm Steer tube length: 176mm, just under 7 inches

Up for sale is a Trek Procaliber SL frame in size XL (21.5"). This is a frame only. It is in excellent condition. I excitedly picked it up at a bike swap last winter and built it as a gravel bike, but really only ended up using it around town, never even rode it on any dirt trails or gravel paths. It really is still in immaculate condition, not even a scratch on the metal guard behind the bottom bracket. Included is the headset, rear skewer, seat collar, and a few cable routing bits. It takes a Boost 148 rear hub, pressfit bottom bracket, 31.6mm seatpost, and tapered 1-1/8" to 1.5" steer tube fork. MSRP new for this frame is $2699.99, this one is in excellent condition for $1000, priced to move. Price includes UPS Ground shipping to the lower 48 states, Paypal only. Message me with any questions and thanks for looking!

Up for sale is a Fox 34 Factory fork, in excellent condition. I rode it during the 2017 season before taking it off my bike. I have held onto it hoping to build up a backup bike with it, but it is collecting dust and I'd rather see someone else ride it. Functionally and cosmetically it is in spectacular condition, the only thing to mention is that the decal has a mark where a zip tie was holding on a computer mount and in another spot is peeling up. You can get decals from Fox for cheap though. No scuffs on the stanchions or lowers. Model: Fox 34 Factory, Kashima coating Wheel size: 29 (fits 27.5+) Travel: 140mm Adjustments: 3-position compression with open mode adjust, & rebound. Hub Compatibility: Boost 110x15mm Steer length: ~180mm, just over 7" (1-1/8" to 1.5" tapered, Cane Creek crown race is included) Condition: Excellent Price includes shipping via UPS Ground within the continental US. Happy to ship elsewhere, or expedited, but shipping would be on the buyer. PayPal only. Please feel free to message me with any questions, and thanks for looking!