npfogell

I just moved to Alaska and have decided to try and sell my practically new Custom Yeti sb165. The seasons are really short up here and I can ski year round. I am selling this bike to pay off some of my student loan debt that is frustrating the crap out of me :-) . I built this bike in June 2020 and have ridden the bike ~12 times. I worked as a Mountain Bike Mechanic at Highland Mountain Bike Park in NH for several years. Yeti sb165 Frameset Large, Turq, w/450lb SLS (orange) spring Indutry Nine Enduro 315C (Carbon) custom (orange and turquoise spokes, Turquoise hubs) 650B (27.5") 2020 Fox 36 Factory 180mm (Kashima) GRIP2 2020 Fox Factory Transfer Seat-post (Kashima) 175mm Wolf Tooth Light Action Dropper Post Lever Front Tire: Maxxis Minion DHF 2.5 DD casing Rear Tire: Maxxis Aggressor 2.5 DD Casing TRP DHR EVO Brakeset w/TRP wide Rotors (180mm rear, 200mm front) Deity Kit: Copperhead stem 35mm, 35mm, (Orange) Skywire 35mm Handlebar Carbon (Turquoise) Knuckleduster Grips (Turquoise) Speedtrap Saddle (Turquoise) SRAM GX 12sp Drivetrain (I went with GX to save some money -can get 3 GX drivetrains for the price of 1 XO1) CushCore installed Front and Rear will include DMR v-Twin Clipless pedals (Black) (new with bike) if you want them. I live in Alaska now so shipping could take some extra time. I will ship the bike in my Dakine Roller travel bag. Bike cost $8250 ($8500 w/bag) This is an expensive but very nice bike....I am looking for someone willing to help me out....I love mountain biking but need to get out of debt and wont be able to ride much in Alaska due to work.

2019 Yeti SB6 Turq Large Turquoise/orange FrameSet w/ Fox Factory DPX2 shock 2019 Fox Factory 36 GRIP 2 Kashima 160mm 2019 Fox Factory Transfer Post Kashima 150mm Wolf Tooth Dropper Post lever 1x Industry Nine Enduro 305 Wheelset w/Torch Hubs (custom colors: 50% silver/blue spokes, silver hubs, turquoise valve stem) TRP Quadiem G-Spec BrakeSet Shimano XT 1x11 Drivetrain w/ Race Face Turbine Crankset/BB MRP Upper chain guide w/bashguard Deity Components (Handlebars/stem/saddle) Muck Nutz Front Fender Maxxis Minion DHF 2.5WT DD 120tpi Front tire Maxxis Aggressor 2.3 DD 120tpi Rear tire I built this bike last June and rode it through October. I am a mechanic and have taken care of the bike and have had no issues with it. I did a full service over the winter/ early this spring including: Full frame strip down and cleaning, Fork service, shock service, wheel true, brake bleeds, replaced all cables and housing, etc It has a brand new rotor and pads on front I will be riding this bike until it sells 4/22...new tires (Maxxis DHF DD front, Maxxis High roller II DD rear), new der cable and housing, new Bottom Bracket installed

Bike mechanic owned. I built this bike last summer and rode it for one season. I absolutely love this bike and will probably build another of the same thing if sold. Capable of anything...and climbs amazingly well! I serviced the bike at the end of the season (December 2017) including: full tear down and rebuild of shock (air can and damper), Fork service, new rear tire, new brake pads, serviced all linkage pivots and bearings, etc... 2017 Rocky Mountain Slayer Frame-set Red/Black Shock: 2017 Fox Factory Float X2 165mm Kashima HSC, LSC, HSR, LSR Fork: 2018 Fox Factory Kashima 170mm FiT4, HSC, LSC, R Wheelset: Custom built i9 Torch hubs (Boost spacing)(orange) w/ Spank Spike Race 33 rims (red) Tires: Maxxis Minion DHF DD casing 2.5 front, Maxxis High Roller 2 DD casing 2.35 rear (brand new)(tubeless both) Drivetrain: Shimano XT 1x11 w/ RaceFace Turbine crank 32t nw RaceFace chainring Brakes: Shimano XT w/ICE tech rotors and pads (new pads) Seatpost: Fox Factory Transfer post Kashima 150mm Saddle: Custom SDG Highland Mountain Bike Park saddle Stem: Spank Spike 35 Red Handlebars: Spank Spike 800 Race with ODI Ruffian grips (red) (with orange highland mountain locks) additional: e*thirteen bash guard, Mucky Nutz front fender (orange and black) message me with any questions! or for more pictures

2017 Rocky Mountain Slayer Red/Black Frame Set with Fox Float x2 shock I built up this bike last summer and am looking to sell the frame/shock. I work at Highland Mountain Bike Shop as a mechanic and have done a complete service of the shock (air can and damper). I vinyl wrapped most of the rear triangle and covered the chain stay with a RaceFace chain stay protector. The frame is in great shape after on season of riding. message me for more pictures...i will add as many as I can here