2014 Specialized crux EVO carbon disc 58cm

2014 Specialized Crux EVO carbon disc 58cm gravel/cyclocross bicycle. SRAM HYDRO


This is an incredible bike. I built it up as a for-fun winter project. I normally ride a 56cm, thought I would give this a go but its just a little too big for my 5'10" frame so I am RELUCTANTLY selling. I built this myself from the frame up and stand behind the build. I purchased the frame second-hand and it shows the most signs of wear, small scratches and scuffs here and there as you would expect, but nothing out of the ordinary or significant, mechanically perfect. There are some small surficial chips on the fork and chain/seat stays. A really good bang for the buck component spec, you wont be able to build it up with similar spec for this price (I challenge you to price out the components.) !



The following parts were NEW as of two months ago when bike was built, I have put (4) rides on the bike since the following components were purchased new and installed:

wheels:

DT swiss 350's 28h centerlock disc straight pull hubs on Pacenti sl25's rims, tubeless, DT swiss brass nips, DT swiss competition RACE spokes (yes the new ones just released) - hand built by Michael J. of true love wheels at Cyclepath here in Portland
Schwalbe G-One tires 35c set-up tubeless (tubeless on Pacenti's is flawless, zero air leaks)

components:

-3T ergonova team CARBON shallow drop bar 44cm
-SRAM FORCE 22 carbon crank 172.5 50/34 tooth GXP
-SRAM RIVAL HYDRO 11 speed YAW levers
-SRAM RIVAL HYDRO DISC calipers front and rear
-SRAM RIVAL 11 speed rear derailleur
-SRAM RIVAL Yaw 11 speed front derailleur
-SRAM FORCE 11 speed 11/32 cassette
-SRAM XX1 11 speed chain
-Wheels manufacturing conversion bb30 to gxp bottom bracket with enduro bearings (super strong, guaranteed to always be creak free)
-DT SWISS rws aluminum ratcheting thru bolt skewers
-SYNTACE f109 aluminum stem, its either 70mm or 80mm
-SHIMANO ice tech rotors CENTERLOCK
-CARBON 27.2 seatpost, zero offset
-CARBON bottle cage
-CARBON headset spacers
-STANS tubeless valve stems
-cables/housing
-FIZIK tape


following components were used when bike was built:


-SPECIALIZED 2014 crux EVO limited edition 58cm frame (full internal routing)
-SPECIALIZED power saddle 155mm width
-SPECIALIZED aluminum seat collar



notes:

-i will include a set of BRAND NEW specialized headset bearings, it cost 50$ to special order them, they are proprietary.
-PEDALS PICTURED ARE NOT INCLUDED, i repeat - not included
-brakes were bled when installed, function perfectly.
-bike was assembled using park tool torque wrenches and presses
-appropriate lubes used correctly per application type - carbon assembly paste, teflon based lube and retaining compounds
-guessing it weighs 16.5 to 17lbs, i do not have a scale