eevilmorty

2021 S-Works enduro (converted from Expert) Sale includes: Both carbon AND stock aluminum links, as pictured (carbon links from ~$400 from local dealer) Fox X2 (unridden since service, functions like new, have receipt, ~$160) Better Bolts titanium bolt kit (~$100) Axle Headset (stainless enduro bearings) Frame is in great condition. That are many scrapes and scratches that are diffifult to see, but mechanically excellent. Has not been crashed, not cracks, creaks, or issues whatsover. There are scrapes to the inside near cassette area, and the chainguard is ripping up a bit. PLEASE review all images, imperfections are documented to the best of my abilities. You are purchasing exactly what you see. There is a descent surficial scratch under the front of the shock. The rear end is lubed, loctited, and torqued to specificaiton. I purchased the carbon links locally from River City Bikes to convert the frame to S-Works (this is the only difference between Expert and S-works bare frame, the links drop several hundred grams). Frame has well been cared for, and seen intermittent riding for two seasons, I have several mtb's so it was not a daily driver. Bearings are in great condition. The rear end really is magic in rough terrain. I also have the WRP mullet link, and silver Cascade Link if you are interested I am the original owner, and have the original purchase receipt. Buyer to pay paypal fees, and flate rate shipping of 90$ which includes insurance Local pickup available I stand behind this description. I do have this listed elsewhere Thank you, -Tom

Santa Cruz Hightower 2, CC, size XL frame has seen a descent amount of miles (~2 seasons) but has been very well cared for ,and just rebuilt from ground up with all new parts. Frame has fine scratches and blemishes that are hard to see except in good lighting, otherwise excellent mechanical condition. • Brakes are bled, all bolts loctited, and/or lubed, and torqued to Santa Cruz specification. • New frame bearings • Setup tubless with Stans and DT Swiss tape • Cascade link and stock included (Cascade is 150mm rear, +5mm chainstay length) • All the NEW parts are from a Canyon Spectral CF7, see their website for specs. • Nothing out of place, professional build quality, assembly guaranteed. • The new parts have only been ridden up and down my street to bed the brake pads in. This bike is 100% dialed, and you could pick it up and ride. • What you see is exactly what you will get. NEW Parts: NEW - FOX 36, Rhythm, GRIP damper, 150mm, steerer left long so you can cut to preference NEW – DT Swiss 1900 wheelset with 370 hubs NEW – Shimano SLX brakes, new SLX pads NEW – Shimano SLX 12 speed shifter NEW – Shimano SLX rotor, 203mm front and rear NEW – Shimano brake adapters NEW – Shimano SLX crankset, 170mm NEW – Shimano SLX threaded bottom bracket NEW – Shimano SLX chain and 12 speed cassette NEW – Shimano SLX derailleur NEW – Shimano dropper lever NEW – Ergon saddle NEW – brake hoses, shift housings, and shift/dropper cables NEW – Canyon G5 aluminum bar, 31.8, G5 grips, 800mm width (cut to taste) Pre-owned Parts Fox Factory Float X – un-ridden since service, have receipt Cascade Components HT2 OneUP V3 dropper post , 180mm, just serviced, no riding since, functions like new Maxxis DHF EXO+ Maxxgrip 2.5 front tire – 85% life left Maxxis Dissector DD Maxterra 2.4 rear tire – 60% life left Bike Yolk T25 seat post clamp Wolf Tooth/Enduro bearing headset – excellent Factor 31.8 stem $175 shipping (if actual shipping costs is less I will refund the difference) *Pedals not included Seller is responsible for Paypal fees and shipping cost. Local pickup encouraged, but willing to ship Thanks