Yea man, thats perfect! Hope my build turns out anywhere near as rad as that!
Well, you're making me blush hahaha. I didn't think it would turn out so nice black. Im not a big fan of just black, if you look at my past builds. I hope to see your build soon. What are you building up now?
So a few months later and my warranty NS Decade frame finally came in. I'm so stoked. They fixed the head tube issue so now you can use an EC44 that has a skirt of up to 16mm. I am so stoked with NS. All they need to do now is put the 44/56 head tube from the Soda on it and it will be perfect, IMO.
What happened to your decade ? Anything to watch out for ? I have a 2013 raw one
The lower part of the head tube was ovalized. If I ran an EC44 lower cup it would cause the headset to loosen up and it was unable to be tightened down properly. If I used a internal cup(ZS44) it was ok, though.
The lower part of the head tube was ovalized. If I ran an EC44 lower cup it would cause the headset to loosen up and it was unable to be tightened down properly. If I used a internal cup(ZS44) it was ok, though.
I had this with my zircus back when I rode a tapered 831 on it
24 "NS Holy 2012 (same as one above) now with Schwalbe Tabletop 2.3 and XT brake. Hadley hubs on Intense Mag DH rims, 20mm front Profile 175 cranks GT pedals DJ1 forks-ish - there's some voodoo in there. https://www.pinkbike.com/photo/12160843/