Congrats to Nicholi and the judges. The most interesting is how ampd Nicholi was , running to fallen riders, having a blast the whole time. Brett looked like he was about to go on trial for murder.???
hey can someone help me figure this out I just serviced my seals and oil on my rockshox boxer RC and I put it all together and now when I compress it it becomes really stiff like feels like something is preventing it from compressing all the way and air is being compressed out the bottom by the lock in screws of the lowers please someone help me solve this thanks,
You probably damaged the air shaft head or the o ring that seals it. Stick a zip tie through the dust seal along the stanchion on the air spring side. If it makes a hiss this is what's happening. Pull the air spring assembly out, remove the o ring from the air shaft head, and check the head for scratches. If it is scratched even the tiniest bit, you need a new air shaft head or spring assembly, whichever you can buy/install. If the head is not scratched at all, replace the o ring seal with a new one and smear grease all over it.
@brianpark: youtube link works SO much better. Link on this page was constantly having to load every 3 seconds, I'm guessing from too many people accessing it. Youtube link streamed perfect.
Internet is spotty where I’m at didn’t get to finish watching. But I hear this all the time a truck driver is different from a 360 barspin. Was it actually a truck driver?
@bulletbassman: that’s correct if your trying to do a truck driver your hand won’t leave the bar it allows more control. A 360 barspin is a lot trickier. In my opinion.
But could not do any of those trick whither I did or not,so why bother