you don't like that one? I had a Funn Rippa, and thought it looked like crap. This ones light, and is completely rounded and bolt-free at the back, so my knees are happier!

 nice but this would look super lush with a regular bmx stem what you think ?

 need higher-rise. I'm a lurch.

 what stem is that?

 Thompson 4-bolt BMX

 function over fashion.

 agreed.

 If you were truely going for function over fashion would you not have 20mm forks and stronger wheels? 719s are mega sketch.

 They are only 2mm narrower than possibly the most popular DH rim out there.

 They are still sketch. Ask Mitchdog.

 Its all about the buildddd.

 JoshSt: it is a 20mm fork, and I built those wheels because they are the best combo of weight to strength I can find. I've jumped on them for the last 9 months, and they're perfect. You just need to know how to build wheels right!

 joshst: how did you mix up weight and fashion? the wheels are light, which to some people(inc. me) means they are high performance to a certain extent, im not going to go run some xc race wheels but these seem to be holding up fine for him so why not save the weight? just my 2cents.

 whooppee for you. I never said 26.5 was particularly light, however people ask for the weights of my builds so I post them.
I've been professionally building street/park/dj bikes for 5 years now. If I wanted advise on building up a minuteman with Z1's, I'd ask you. Otherwise... no advise needed, thanks.

 You know what would be super cool is if you listed the parts for me. I'll only be a little sad if you don't.

 But the wheelset is so shitty... its a formula/mx33. I will list the actual wheelset I run (when I go 26")

Frame: Dobermann Pinscher, Long frame, custom gussets.
Fork: '09 Rockshox Reba Team Maxle light, lowered to 80mm
Headset: Chris King 1 1/8 No-threadset
Stem: Thomson BMX 4-bolt, 25.4mm
Bar: Gusset Open-Prison, 3" rise
Grips: Animal Edwins (now run all-city track-grips)
Brake: Avid Juicy 5, 160mm rotor, Dangerboy custom lever
Cranks: Primo Hollowbites, 175mm, 22mm Euro BB, (waiting for Ti spindle upgrade)
Pedals: Wellgo MG1
Chainring: Haro Forum Lite, 25T
Chain: KMC 710SL (right now running 1/2 link Pintle/Stolen chain)
Seat: Duo Rogue-status
Post: 25.4mm stump post (premium), shimmed to 31.6mm

Wheels, 24"
Front Hub: Novatec 20mm
Rear Hub: DMR revolver 6-pawl, running 10T driver (& Dura-ace free-hub grease)
Spokes: DT champion, stainless, with brass nipples
Front Rim: Arrow Racing FR-X, 24", 32H
Rear rim: Arrow Racing DH-X, 24", 36H
Tires: Schwalbe Tabletop, 24x2.25"
Tubes: Axiom 20"

Wheels, 26"
Front Hub: Hope Pro-II Trials, 20mm
Rear-Hub: Hope Pro-II Trials, running 12T cog.
Spokes: DT Revolution (double-butted), with brass nipples
Rims: Mavic 719, 26", 32H
Tires: Micro-knobby F&R/Bontager Earl-Urban (R) SB8 (F. only)
Tubes: Axiom, 24"

 a bit, but I got used to it fast. I don't even notice it any more.

 not counting wheels and frame- $1700 approx.

 how much would it be to build it exactly how it is??

 alas, I gave my last one away... Hey... actually... I might have a psylo thats only a little shitkicked...

 They're good, very light, but you have to pay attention to your spoke tension more than you would with a 721, or something similar

 yeah same deal with 521s, thx

 And it's a pinscher frame too right?

 either really. I used them for both. A little slippery on loose dirt, but whatever.

 thanks bro! Glad for your input... I respect your opinion in particular since you apparently trust society forks and can't make an alu. frame build lighter than some of my steel ones.

 i may be interested in this bke whats the lowest price if i ship

 you want full bike or parts? Keep in mind this exact bike is not for sale (its my bike)

 yeah.

 $2900

 dude, your BMX is epic, but sadly this bike is my baby, and she isn't for sale. Thanks for the offer though!

 sorry, dude, not for sale.