my god i see so, so many little bmxer kids riding around with spacers and races in all the wrong places, and a horrible CLANG every time they so much as ride over an atom. they all need to learn these things, so much simpler than they look.
Just wait 'til you see someone with their sealed bearings installed in the wrong way round. It's hard not to laugh whilst at the same time you don't want to offend. xD
see on my rf and fsa the bearing's were stuck fast so i just left the bugger's alone,all i did do was cover the seal's with grease,and filled any gap's to try and seal them in,along with a nice coating on all the metal to metal part's to stop creaking and further water proof them.
Some headsets have the bearing as a pressed unit (like bearings in a hub), so they will be hard to remove without a bearing puller/hammer and punch. I think the PIG and Diablous headsets are this type.
My headset just won't stop creaking. It's those bloody carbon spacers!
Yeah, they creak when the steerer flexes or there is movement between the steerer/stem interface. Which is worse with uberlight stems like mine because you can't torque the bolts up more to prevent the slight movement.