My broken Hope V2 disk :( guess this is what happens when you put a Hope 6 piston caliper on it :s
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
My broken Hope V2 disk :( guess this is what happens when you put a Hope 6 piston caliper on it :s
13 Comments
  • 1 0
 i do pedalkicks on my demo.. with the brake blocked. and so .. never broke a spider.. mate of mine runs m6 with alu spider rotors on his trials bike.. thats even more abuse.. i did warn him about this.. but he hasn't any problems yet..
  • 1 0
 dat is nog niet zo erg :p
ik had net het zelfde schijfeje maar dan in het goud :p
en bij is het hele middelste stuk naar de haaien
geen scheurtjes eh helemaal gebroken ik heb het middelste stuk in 7kleine stukjes :p
  • 1 0
 geen garantie gekregen zeker?
  • 1 0
 nee helaas niet
  • 1 0
 typisch -_- ze hebben mij gewoon doodleuk verteld dat het verkeerd gemonteerd was f*ckers
  • 2 0
 what are those marks in the middle of the arms? looks like it took a beating off something rubbing
  • 1 0
 thats nothing bad really, caused by a bolt that was sticking out of the adapter, I replaced the bolt with a shorter one, it has nothing to do with the disk breaking
  • 1 0
 ahh just looked as if something was hitting it quite hard which may have caused the cracks but if the bolt was replaced early then it shouldnt have caused them
  • 1 0
 this same thing happend to my hope floating rotor, 4 cracks where the outer disk is riveted onto the centre. and that was using a 2 pot shimano deore XT.
  • 1 0
 could also be that it has been rubbing on the disc mount tabs at some point
  • 1 0
 don't think so, the screws were still tight and the size matches the holes perfectly (used the screws that came with the disk)
  • 1 0
 i said it before, I've driven floating disks before. they are nothing but misery
  • 2 0
 Man that unreliable!! :O







Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.027752
Mobile Version of Website