ORLY? It's all apart at the moment so will look at this. Does your hit the frame at all? Mine just rubs when the bike is unweighted, as soon as it's in sag it's fine...
what size ring you use? i had the lg1 whit a 38t ring, then it rubs a bit. as i remember had to but one thick and one half spacer on the guide and on the cranks on drive side 2 spacer for the bb and on left side 1 spacer.
later i changed to 34t ring so i swap the LG1's backplate for a smaller one. now it as good clearance never rub or hit the frame.
36t front ring and 2 spacers on the guide, it slightly rubs yes.
I moved the base plate around yesterday like you suggested, I should have most of the bike back together today but I'm waiting for the mineral oil from Mavic to service the rear hub. Also thinking about going 6 speed on the rear.