2socks

Selling my Murmur Factory (aka V2 design), size Large. I've loved this frame and am the original owner. I almost sold it earlier this year but wanted to be sure I also loved its successor (Reeb SST). It's still in the box after a season on the new bike, so it's time to let it go. It's Taiwan-built, which means the front triangle is TIG welded by some of the world's best frame builders. The the entire frame is ED coated--that's the black visible where the paint has chipped, which means you don't need to worry about rust. The rear end is brand new because I dented the chainstay on the original (not a crash) and the integrity was questionable. The pivot bearings are a new set from SKF, and I'll throw in an extra pair with the frame & shock. The shock is working well, but, could probably use an air can service. I tried a bunch of shocks, and mostly used an EXT Storia, so this doesn't have a ton of mileage. There are some cosmetic signs of use, e.g. scratches and chips to the paint, and I've tried my best to show them in the photos. Not evident in the pictures is that some of the clear coat came off the bottom of the downtube when I removed the heli tape to inspect after numerous rock strikes. It did its job, so I put another layer of tape back on. Thanks for looking and feel free to message me with any questions.

Brand new 190 mm air shaft for 2021 and newer Fox 40. Also selling a 2023 Fox 40 Performance 29 with short offset drop crowns in a separate ad. Service Set: Air Shaft Assy, 40, 190mm, FLOAT NA 2.1, +14.7cc Neg Buyer pays shipping.

Brand new, never used it. Retails for $55. Make me an offer! From wolf tooth: "These lower headset cup extenders allow you to adjust the geometry of your bike frame by increasing the effective fork length by 10mm. They allow you to do things like use a rigid fork on a suspension-corrected frame or use a fork with a shorter axle-to-crown height rather than what the frame was designed to use. They can also be used to increase the bottom bracket height and lower the headtube angle. Wolf Tooth Precision Headsets are machined in the USA out of aircraft-grade 6061 aluminum with superior sealing for protection against the elements. These ZS headsets are for frames with internal bearing cups that are pressed into the frame. Compatibility Any frame that uses a zero stack headset with a 56mm lower head tube inner diameter Upper and lowers headsets sold separately Enduro stainless steel sealed bearings included"

I'm selling a bunch of Angleset parts I have left from my 2018 Guerrilla Gravity Smash. The lot has a bunch of different cups which can be mixed & matched to achieve different head tube angles. Exactly how much your head angle is changed depends upon how you install the cups, and how long your bike's headtube is. Don't take the markings on the cups at face value. It's all in good working order, but has some cosmetic wear from use, removal and rattling around the parts bin. Included: +/- 0 degree lower cup +/- 1.5 degree lower cup +/- 0.5 degree upper cup +/- 1.0 degree upper cup one upper and three lower gimbals (original gold ones plus two gray lower spares) complete set of bearings (upper & lower) top cap star nut compression ring upper bearing cover The only bit missing is a crown race. Can work with a tapered or straight steerer, just add the proper crown race for your fork. Thanks for looking.