Pinkbike.com
Powered by Outside
Bizzam
- Member since Sep 21, 2012
- Male / 39
-
Grand Junction , Colorado - 4 Followers
- 4 Trailforks Points
Recent
Selling
Mar 25, 2025 at 10:48
Mar 25, 2025
Selling
Mar 6, 2025 at 17:57
Mar 6, 2025
Yeti Beti SB5c
$1900 USDThey don't make 'em like this anymore! This bike is unbelievably light compared to what's available nowadays. If you are looking for a great do-it-all bike at a fantastic price, look no further.
This small Yeti (Beti) SB5c is a full carbon frame, and equal to what Yeti now calls their higher end "Turq" series frames. It has also been upgraded with carbon ENVE wheels with DT Swiss hubs. These wheels were a ~3k upgrade when new. This makes for an ultralight and stiff platform to give you maximum cornering confidence.
This bike is a few years old, but all maintenance has been kept up with. Only selling because my wife switched to something with more travel.
Come take a look! You'll be impressed.
Selling
Mar 6, 2025 at 17:53
Mar 6, 2025
Selling
Jun 19, 2022 at 18:01
Jun 19, 2022
Shimano XTR 9120 Brakes
$420 USDI have a set of XTR brakes that I took off one of my bikes. They are in decent condition and havent seen much use. The levers are straight but there are some minor scratches. Something also contaminated the front brake, so most likely will need a new set of pads and possibly a front rotor. I'm including them and not throwing them away because they may be salvageable, I dont know.
The rear works great but will need a bleed since I had to disconnect the line to remove the brake from my internally routed frame.
All of the hardware is here and the tape is holding the screws in place.
These were on a large internally routed frame so the rear line should be long enough for about any bike.
Selling
Mar 15, 2022 at 18:18
Mar 15, 2022
Kona Honzo Ti
$3000 USDThinning the herd a little bit here and letting one I love go. I'm not sure what the exact weight of this bike is, but it's very light. This is such a great bike for jamming big rides and having fun on the downhills with the slacker geometry. It has normal wear and tear for a mountain bike, but no major scratches and zero dents.
Build specs:
XTR 1x11 drive train
XTR Brakes and rotors
Chris King Headset
Enve flat bar
Fox Transfer dropper
Fox 34 150mm travel fork
Stan's Flow Rims with DT 240 hubs
Maxxis Minion DHF front
Maxxis Ardent rear
Selling
Jun 14, 2021 at 13:27
Jun 14, 2021
Fox Factory 36 Grip 2
$750 USDThis fork was briefly installed on a bike I owned a year or so ago. It really didn't see much ride time, other hobbies have taken priority. I kept it around because I considered putting it on my current bike but never did. It's a 170mm travel fork but currently has a 160 air shaft installed. It will come with the 170 air shaft as well, and it is extremely easy to change if you wish.
Has been stored indoors.
Steerer cut to 6 3/4 inches.
Selling
Jun 10, 2020 at 21:14
Jun 10, 2020
Santa Cruz Hightower LT
$1600 USDI bought this as a frame only, but I’m going to go a different direction. There is some typical damage expected on a mountain bike, but overall this is in good condition. It is the C model, size large.
Selling
Jun 9, 2020 at 18:28
Jun 9, 2020
Fox Factory 36
$500 USDThis came with a frame set I recently bought, but I won’t be needing it. It’s currently set to 150mm of travel. The steerer is 7 1/4 inches. There is a small scuff on the crown, and a knick in the paint on the right side of the arch. I’m not sure what the offset is, but let’s be honest, you probably wouldn’t notice a difference anyway.
70,988 views
234 Photos
Favorite news
Real Talk on Bikepacking the Colorado Trail
18 Jan 2017
Video: Brett Tippie's 'NiteRider'
27 May 2013
Red Bull Rampage - The Full Broadcast
11 Dec 2012
Video: Marshall - Autumn
28 Nov 2012