Brad411

Looking to sell as a package or parts. If interested, please contact me and we can talk about what you are looking for in more detail. I have parts to build a complete with the exception of a few things. -2005 19" Ironhorse Yakuza Bakuto 893 frame. I've owned it for many years and built it up. 6061 aluminum hardtail with a beefy 1.5" straight headtube so can be used with modern tapered forks with proper adapters. These were built to take massive abuse (freeride, urban hucking, aggressive trail riding). They are incredibly tough. BB, FSA The Pig headset cups, seat post clamp, derailleur hanger, all attached, included. Have headset bearings and adapters. -2006 Marzocchi Bomber 66 RC2X 170mm in exceptional condition. Legendary, best that could be bought. Made in Italy. Stanchions have zero scratches, has typical cosmetic trail rash on the lowers and decals. All dials (rebound, RC2 compression, X high-speed compression bottom-out) are intact and click sharply, it holds oil, the steer tube is 1 1/8", 7 7/16", 189mm long. Smooth action. Axle included. Hub available. -26" Sun Rims S-Type MTX 34 6061 32 spoke hole alloy rims. No flat spots, lip dents or cracks. -26x2.5 Maxxis Minion Maxxpro DH F+R. Legendary with the classic MaxxPro 60a compound and full dual-ply DH casing. Minor use, center knobs have sharp edges, no missing side knobs. No rot or cracking. -SDG USA Bel-Air ST I-Beam Saddle & 30.0mm Seatpost Combo. Corners are perfectly clean, with zero scuffs, tears, or exposed plastic, it looks NOS. Post full length, never been cut. -Components Inventory: Front/Rear Hubs Handlebars Raceface Grips Cranks Pedals Sram Derailleurs and Shifters Sprockets Jagwire Bashguards E-thirteen Chain guide Hayes 203mm rotors Caliper adapters All fitting to this era, tough built, respected work horse, mid-2000s freeride tech. Can share more pictures.

Up for sale is a highly sought-after 2006 Marzocchi Bomber 66 RC2X. This is widely regarded by retro freeride, DH, and urban huck builders as the absolute gold-standard single-crown fork. It stems from the final, legendary year of high-end production entirely "Made in Italy" before manufacturing shifted to Taiwan. The small bump compliance and bottom-out resistance on this open-bath coil fork are incredible. Mechanical & Cosmetic Condition: Stanchions: Absolutely pristine. Zero scratches, wear marks, or nicks. Damping: 100% functional. It features the holy grail RC2X cartridge system. All external adjusters (rebound, RC2 low-speed compression, and the bottom red "X" high-speed compression bottom-out dial) are intact, click sharply, and perform exactly as they should. Chassis: Smooth action and holds oil perfectly. The lowers and original decals show standard, cosmetic trail rash from normal use, but the fork is completely sound with zero structural issues. Steerer Tube: 1 1/8" straight alloy steerer, 7 7/16" (189mm) length. Axle: Includes the original, dedicated Marzocchi 20mm bolt-on thru-axle. (Note: I also have a matching 20mm front hub available if you need it for your wheel build).