CharlieeButton

Selling my 2010 Specialized Rockhopper SL - 17" (medium) A few minor chips in paintwork, and some scuffing on cranks, as you would expect from a 2010 bike. Recently had a full-service and replaced rear cassette and chain by local bike shop. selling due to moving abroad, £200 please pm for anymore information or contact me on 07795470666 Cheers - Charliee :) Spec list: Frame: Specialized M4 fully manipulated alloy frame, fully butted, ORE Downtube, asymmetrical seat stays, forged dropouts Fork: RockShox Dart 3 SL, 100mm, 1 piece magnesium lower, alloy steerer, adj. rib. Damping with LO and preload adjust, size-specific spring rates Front Derailleur: Shimano Deore, 34.9mm clamp, top swing, bottom pull Rear Derailleur: Shimano RD-M592 Deore Shadow, long cage Shifters: Shimano SL-590 Deore trigger Chainset: Shimano FC-M442, Octalink Spline Chainings: 44/32/22 tooth chain rings Bottom Bracket: Shimano BB-ES25, Octalink spline, cartridge bearing, 68mm x 118mm Cassette: Shimano HG50, 9-speed, 11-34th Chain: Shimano 9 spd Pedals: Alloy body and cage, 9/16 inch Front Brake: Avid Juicy 1, dual piston with 160mm rotor Rear Brake: Gussett Chute, hydraulic disc, dual piston with 185mm rotor Handlebars: Butted alloy riser bar, 25mm rise, 660mm wide, 8 degree back sweep, 7 degree up sweep Stem: 3D forged alloy, reverse 4-bolt, 7 degree rise, 31.8mm clamp Headset: 1-1/8 inch thread less, Campy style semi-cartridge bearings Grips: Specialized Enduro, dual compound Kraton, no flange Rims: Alex RHD 26 inch, pinned, alloy double wall, eyelets, 28h front and 32h rear Front Hub: Forged alloy, hi/low flange, sealed cartridge bearing, machined disc mount, 28hole Rear Hub: Forged alloy, double sealed cartridge bearing, machined disc mount, cassette, QR, 32hole Front Tyre: Continental mountain King, 26x2.4" Rear Tyre: Specialized Fast Trak LK Control, 26×2.0″ Saddle: Specialized Pitch Pro, Body Geometry, hollow Cr-Mo rails.