DeeCount

For sale is a Renthal Fatbar Carbon Lite 40mm Handlebar 31.8/740mm M131-01-BK. Price includes PayPal fees and shipping to continental US. This bar is in 100% working condition. Cosmetically it shows use, please view all the included pictures taken in high definition for more details. The bike this was installed on never saw rain or mud and was always stored indoors. The bar has never been crashed or hit the ground. There are no cracks or chips in the carbon. When I was setting up my cockpit I ended up having to use 4 different stems before settling on the the correct geometry. I used a Hope XC, Race Face Atlas, and two lengths of Industry Nine. All those different stems left varying marks on the handlebar clamp area and have squished/marked up the decal. The controls were SRAM G2 levers, a PNW Loam dropper lever (standalone), SRAM AXS shifter (standalone) and some lock-on grips. They have left marks on the handlebar with the dropper lever leaving an impression in the carbon. I'm happy to answer any questions so feel free to message me. Handlebar Specifications: Width: 740mm Backsweep: 7° Upsweep: 5° Rise: 40mm Clamping Diameter: 31.8mm Weight**: 181g **Weight as measured on a Park Tool DS-2 scale

For sale is a Industry Nine A318 Stem - 40mm, 31.8mm Clamp, +/-4.4mm Rise, 6° - (Red). Price includes PayPal fees and shipping to the continental US. This stem is in new (other) / open-box condition. I purchased this new over the winter and mounted it on my FS bike. A few months later I got an incredible deal on a 35mm bar/stem combo. The bike it was mounted on was stored in my living room so the stem wasn't ridden or even outside. The stainless steel hardware in brand new. I had installed the stem with a Better Bolts titanium kit. On a side note, you can get the weight down to 125g with M5x18 titanium bolts and washers. Cosmetic condition is as new, please review all the provided pictures taken in high resolution for more details. Actual weight as measured on a Park Took DS-2 scale is 135g. I'm happy to answer any questions so feel free to message me.

For sale are Shimano Deore XT PD-M8140 ML Platform Pedals. Price includes PayPal fees and shipping to continental US. These pedals are in excellent low mileage condition. Please view all the included pictures taken in high resolution for more details on condition. These pedals come with the long pins installed (Shimano part# YL8A98020) Both pedal axles are tight and smooth. All the pins are in perfect condition, no scrapes or scuffs. The pedal body had a few areas on the edges that had very minor scuffs, I touched those up with Duplicolor Semi-Gloss black automotive touch up paint using a micro dabber. The pedals axles use a seal cartridge axle with Shimano's cup and cone bearings which is why they spin so smooth and freely, no bushings here. The included short pins and manual are sealed new. Platform specifications: 110mm x 115mm for 43-48 shoe 10 pins per side (40 total) Actual weight as measured on a Park Tool DS-2 scale is 488g. I'm happy to answer any questions so feel free to message me.

For sale is a PUSH Industries Fork Seal Installation Tool - 34mm. Model: SD-34 I bought this tool to install a set of replacement fork seals on my Fox Factory 34 so it was only used one time. I have sold that fork so I no longer need this tool. Please view all the included pictures taken in high resolution for more details on condition. The seal install put a scuff in the lip of the seal stop where the tool contacts the fork leg lower but it is just cosmetic. The last picture is the tool with the old seal which shows the scuff does not contact the seal. Price includes PayPal fees and shipping to continental US. I'm happy to answer any questions so feel free to message me. From the manufacturer: Description: Precision machined in-house at PUSH out of non-damaging/non-marring impact resistant Acetyl material. PUSH Seal Driver design allows “preloading” of both flanged and flangeless fork seals. Guide bushing and seal stop design ensures 100% alignment of new generation flangeless seals each and every time without the guess work! Great for both the DIY and professional mechanic! Features: 100% Manufactured In-House in Colorado Works with both "Flanged" and "Flangeless" fork seals Locates into fork bushing for perfect alignment Sits above fork brace when installed for extra protection Machined from High-Strength Black Acetyl

For sale is a Renthal Fatbar Lite Carbon35 40mm Rise handlebar. This handlebar is new/sealed. This is the newest version of the Fatbar Lite Carbon35 from Renthal (2026). The color is black with steath decals (Model# M163-01-006-01). The previous version was black with gold decals/white lettering (Model# M163-01-BK). Price includes PayPal fees and shipping to continental US. I'm happy to answer any questions so feel free to message me. From the manufacturer: The Renthal Fatbar Lite Carbon is the ultimate light-weight, trail-proof handlebar. Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon is the product of an intense and in-depth research and development program. This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption. Handlebar Specifications: Width: 760mm Backsweep: 7° Upsweep: 5° Rise: 40mm Clamping Diameter: 35mm Weight: 190g

For sale is a Race Face Atlas 31.8 Stem - 65mm Red. Price includes PayPal fees and shipping to continental US. This stem is in New (Other) condition. I purchased this new and did a test fit on my bike. It is unridden/unused but has been mounted. The hardware is new/unused as I did the test fit with Better Bolts titanium. Cosmetic condition is as new, not a mark on it. I'm happy to answer any questions so feel free to message me. Specifications: Clamp Diameter: 31.8mm Stem Length: 65mm Material: 6061 Aluminum Stack: 40mm Rise: 0° Steer Tube Diameter: 1 1/8" Weight**: 170 g **Actual weight as measured on a Park Tool DS-2 scale is 170g. You can get it down to 158g using Titanium bolts and washers.