FullTiltBoogie
- Member since Nov 20, 2011
- Male / 36
- Bend , Oregon
- 16 Followers
- 0 Trailforks Points
Recent
Selling
Nov 5, 2023 at 7:18
Nov 5, 2023Custom Fixed Gear Track Bike Chromoly Aero Tubing
$900 USDI commissioned this frame at the beginning of 2023 from a local custom frame builder. It was built with all Columbus 4130 chromoly tubing and has an aero shaped downtime and top tube. The head tube is 34mm and the seat stays are 11.5-13.5mm tapered to increase the compliance and improve the ride quality on the street. I upgraded to flanged drop outs instead of the plate style drop outs, upgraded the bottom bracket to T47 and upgraded the chain stays are 12-22.5mm tapered to increase lateral stiffness and improve peddling efficiency. The bike is very well balanced for riding on the street or the track and this thing is fast! I also had a single set of bottle bosses included on the seat tube and it can fit a large water bottle.
The paint on the frame and the fork is a custom color called Ox Blood Red. It is a candy red over black that shifts from a brilliant deep red in direct sun to almost black in the shade with awesome highlight tones in between. Its hard to photograph well and looks even more stunning in person.
The parts build is as follows:
Carbon Whisky Fork - I left the steer tube uncut so it currently has 45mm of spacers under the stem.
Cane Creek 40 Headset
Bianchi Reparto Corse Stem 110mm
Shimano Pro PLT Carbon 46cm Handlebars
Dt Swiss T1800 High Flange Track Wheels
Vittoria Rubino Pro Graphene 2.0 Tires 700 x 25
Vision Track Crank with 49t Aero Chainring and 165mm arms
BB386 EVO
Steel All City 1/8" 17T Cog
1/8" Black Oxide Chain
Orbea OC Carbon Seatpost 27.2mm with 20mm Setback
Prologo Akero Saddle
Thomson Seat Clamp
I included a picture of the CAD rendering with important measurements and angles.
The bike can have a front brake installed because the fork is drilled for a brake but the front wheel would need to be replaced with something that has a brake track.
The bike will not come with pedals or bottle cage.
Selling
Jun 20, 2023 at 11:06
Jun 20, 2023Industry Nine Enduro S 29” Wheels w/ 1/1 Hubs
$400 USD12 x 157 / 15 x 110 Spacing
6 Bolt Rotors
MicroSpline Freehub Body
Brand new, never used or set up. They are taped and have valves installed from the factory.
They will come with Galfer 180 rotors front and rear for no extra cost.
Selling
Sep 7, 2022 at 10:26
Sep 7, 2022Santa Cruz Bronson S / Carbon C / MX
$4500 USDHowdy y'all,
I have a Bronson C in the S Build that Im looking to find a good home for. I predominantly ride a single speed rigid these days but convinced myself that I needed a modern full suspension trail bike a few months ago. I went to my LBS and picked this beauty up and rode it 8 or 9 times. The bikes handling is fantastic and the climbing is surprising efficient but it doesn't really suit my riding style these days (slow) and its overkill on a majority of my local trails. It has an upgraded carbon XX1 crank as well as a Mercury carbon front wheel I had on hand from another build. I have the stock GX crank and stock front Raceface ARC 30 wheel that will come with the purchase. The bike cost $6850 after tax and I have it listed very reasonably considering the immaculate "like-new" condition of the frame and all components. It just got back from the shop where they did the complimentary tune up that comes with the purchase of the bike so it is freshly cleaned and tuned and ready to ride. If you need it shipped, the shipping cost is on you but I will have my shop box it up for no extra charge. The only thing Im going to take off of it is the computer mount but it will come as pictured plus stock crank and front wheel otherwise. Thanks for looking!
Selling
Jul 9, 2021 at 18:34
Jul 9, 2021DT Swiss 240s Hubs for MTB Thru Axle 6 Bolt Disc
$400 USDThese hubs just came off of a new bike since my buddy wanted Onyx hubs because of the silent engagement. He only has 2 rides (two!) on these hubs and they are in immaculate condition. The hubs are 28 hole drilling, 6 bolt disc and 110x15 and 148x12 spacing. There is a slight scratch on the rear hub shell just inboard of the flange from removing spokes and catching a sharp end on the finish, I have added a picture to show that clearly. There will be the normal spoke impressions on the spoke holes in the flange from being laced up and the hub being made of lightweight aluminum. Same with the freehub body, you will see the normal casette "bite" marks since its is so lightweight. They are already in a box and ready to ship!
36,959 views
189 Photos
Favorite news
Video: Martyn Ashton - Road Bike Party
9 Oct 2012
Video: Bas van Steenbergen at Silver Star
13 Oct 2012
Video: At Home with Kirill Benderoni
16 Sep 2012