GBrown95

As in photos, lightly used as swapped to HG body instead. Bearings running smooth. Comes with all three spacers for freehub and rear axle. This came off a bike that uses a 135x10 bolted axle. It may also be the same for thru-axle hubs but I'm not sure - please check first! Price includes PayPal fees + postage. Cheers.

4 piston front / 2 piston rear with 1 finger levers. Levers can be run either way round. Hoses 820 / 1490mm. Slight nick on the rear hose through the first layer, it’s been like this ~6 months with no sign of leaking but noting it anyway and photo to show what it looks like. Bleed on them is solid (I did a full fluid flush around 1500km ago), and comes with brand new semi-metallic pads in the box. Well used with scuffs and signs of use but no bends / cracks anywhere and functionality is excellent. Came off a bike with ~1300mm wheelbase so should be good for most bikes. Sold as seen - no rotors or mounting bolts. Price includes PayPal fees and postage. Any questions, fire away!

Joystick 8 Bit Handlebars 800mm x 20mm rise 35mm clamp Used, some scuffs but no scoring or damage. DMR Defy Stem 35mm length 35mm clamp Will only sell these together. Postage available.

Frame + DVO shock + headset Size L (Reach 510mm, Stack 639mm, Top Tube 644mm, Seat Tube 460mm, HTA 64.5, STA 78, Wheelbase 1317mm) This is a big size large so please take a look at geo dimensions carefully. For reference I’m 182cm and its on the bigger side for me but a very comfortable seated position as STA is very steep. Bought January 2020 new from Pole (can provide original receipts). Has not been ridden since May 2022 as been away bike touring and don’t have the time or space for this in my life now sadly. Details below. The good: - One of the original long/low/slack trail bikes, geometry is right up to date with modern numbers despite being released in 2018 - Mechanically excellent condition, I’ve just changed all frame bearings, fully greased pivot axles .etc. - Cane Creek 40 headset fitted and in good working condition - Comes with all the spares I can find to fit inc. spare main pivot bearings, DVO shock manual/spare bushings/volume spacers, cable clamps if you route externally, alternative dropouts for non-boost wheels + anything else I come across - DVO Topaz T3 shock runs really nicely (once serviced) The bad: - Pole Bikes has now ceased trading so no warranty support with any issues. I wouldn’t expect to have any, and have had zero issues in all the time I’ve owned it but something to note and is reflected in price. The frame originally came with a 5 year warranty which would end Jan 2025. - It’s a well-used frame, so lots of small bits of cosmetic damage, paints chips and scuffs, DIY frame protection. No effect on performance but please don’t expect a perfect frame - The shock needs a full service. Having not been used for over 2 years I can hear lots of air in the damper and the seals could no doubt do with replacing to get it back to it’s best. This should be fairly uncomplicated for you / a service tech, but the price does reflect the need for this. Happy to answer questions as needed. Collection from EH3 preferred but can post if required. Also got the forks from this build up for sale linked below. Happy to look at combined offers if useful and you’re well on your way to building up a bargain trail bike! https://www.pinkbike.com/buysell/3917755/

2019 model (Charger 2 RC damper) 150mm travel 29" wheels 42mm offset BOOST 110x15 spacing, QR Maxle Tapered steerer cut to 185mm PM180 brake mount Excellent functional condition, poor cosmetic. Details below. Collection preferred EH3, or postage available. Good: - Unused since May 2022, and I’ve just fully serviced the whole fork (Sept 2024) inc. new seals and air spring / damper teardown so it’s running perfectly. - DebonAir C1 sealed fitted to airspring side (will also include B2 sealhead that can be swapped back in if preferred) as I found it to sit higher in the travel - Stanchions in excellent condition, no chips or scuffs - Comes with spare air spring seals, spare foam rings and crush washers for service, volume spacers (1 currently installed) Bad: - As a lockdown project I decided to hand sand the original paint off the lowers (I know!) to get to the raw metal underneath. They’re now fairly oxidised but a bit of light sanding and polish would get them shining again if wanted, or would be an easy job to repaint the lowers. - Decals are looking very tatty (replacements easily available) - I stripped the threads on the cable clamp bolt so the hole has now been drilled through to allow a small cable tie to pass through and hold the brake hose instead - No star nut installed Any questions please fire them over!

Specialized Roval 29er Front Wheel BOOST (110x15) with Torque Caps (Rockshox Forks ONLY - please check compatibility) 6-bolt rotor attachment Taped for Tubeless, inflates easily from experience. 29mm Inner Rim Width Comes with valve installed although core is a bit sticky and could do with replacing. Hub bearings all good, rim is scraped as you'd imagine for a used wheel but still runs straight - have tried to show in photos. The rim has a tiny flat spot around the valve, but only noticeable without tyre installed. Once tyre is on I didn't notice it. Can post if required, this would be £10 extra so collection preferred. Any questions just ask! Greg

I've had this headset for years and never used it. Brand new other than the crown race has a few scuffs on the underside (not facing the bearings). 34EESS Headset 34mm External Top + Bottom Cups 1 1/8 Straight Steerer Angular contact sealed cartridge bearings Split crown race 2 starnuts included. I'd rather see this used than sitting in my basement - make me an offer! Thanks

3T Arx-Pro stem. 130mm, 6 degree rise/drop. 31.8mm clamp 1 1/8 steerer Good condition, bolts a little rusty but functionally fine or could be replaced. Price is posted.