Joey-Propane
- Member since Jan 16, 2011
- Male / 26
-
Essex , United Kingdom - 2 Followers
- 0 Trailforks Points
Recent
Selling
Mar 31, 2012 at 5:09
Mar 31, 2012
Hope Rear QR Skewer Black
$10 GBPPerfect condition, new frame has a maxle rear end so no good to me anymore. Price includes postage.
Selling
Mar 31, 2012 at 5:05
Mar 31, 2012
VP Components Tapered Headset
$25 GBPTapered headset for tapered steerers with 44mm zero stack top cup and 56mm zero stack bottom cup. Came with frame (but not installed) but surplus to requirement as I already had straight steerer fork and reducer headset. Looks like it's had minor use but bearings are fine and spin freely, comes with black spacers and SFN.
Selling
Mar 31, 2012 at 4:58
Mar 31, 2012
Hope Front+Rear Brake Mounting Brackets
$12 GBPIS to post mount 160mm rear (F) and post mount 183mm front (H), both in silver obviously.
Selling
Mar 31, 2012 at 4:53
Mar 31, 2012
Hope Tapered Headset UNUSED
$40 GBPUnused Hope Tapered headset for frames with integrated top and EXTERNAL bottom cup in the default black. Was bought as a "pix'n'mix" option before I bought a frame that uses a zero-stack 56mm bottom cup so no good to me. Top part that seals the bearings IS included, just not pictured, this is a complete headset.
Hope's designations:
- (2) Top - 1 1/8" Integral (43.95 dia)
- (F) Bottom - 1.5" Traditional (49.57 dia)
Would suit something like a Transition Covert/Bandit for example.
Selling
Mar 31, 2012 at 4:36
Mar 31, 2012
Sunline V1 745mm Low Rise Grey/Silver
$25 GBPPerfect condition, barely used due to replacing them with an identical set but in black. Not much to say other than believe the hype, these are about as good as alloy bars get, strong, wide, light, comfy and look great.
Selling
Mar 31, 2012 at 4:31
Mar 31, 2012
Fox RP23 XV Boost Valve 8.5" x 2.5"
$115 GBPUnused since getting with a 2nd hand frame (project that never come to be). Perfect condition physically, with all the adjusters working perfectly, but may need a oil service due to the amount of time it's been sat in a box (about 10 months). Has 42mm X 8mm mounting hardware installed but I can take it into work and remove them in the vice if needed.
Price includes delivery via 24/48h courier.
Selling
Mar 31, 2012 at 4:17
Mar 31, 2012
Stan's ZTR Flow on Hope Pro II (Merlin Built)
$200 GBPVery little use, probably less than 150 miles and only on local singletrack, so in absolutely perfect structural nick. A couple of small marks to the anodizing from mounting and removing tires are probably present, but 100% true with no flat spots, no wobbly spokes, no play in bearings and loud-as-it-came-out-the-box freehub. Built by Merlin Cycles so will probably remain that way till the end of time.
Rims have been taped with proper Stan''s yellow tape and fitted with custom blue decals from Slik Graphics. Front hub has 15mm end caps fitted, 160 and 183mm Blue floating rotors also included. Will be shipped in a proper box with plenty of protection and shipped via courier.
Any Q's pleas ask.
12,415 views
