Joosh47

Selling my wheelset I built up in 2020. Onyx Vesper hubs, centerlock, microspline, boost 148 Bontrager Line Pro rims, 32H DT Spokes, silver Brass nipples These wheels have been super stout and reliable during my ownership. Up until last year I was putting maybe 50 hours a year on these wheels, so they are still fairly fresh. Both wheels are perfectly true and in great tension. I just overhauled both hubs w/ fresh Motorex grease and the crazy expensive Kluber for the sprag clutch. The front wheel received new bearings last year, the rear has all new bearings (apart from the small one in the center of the hub shell) this spring. Both are spinning smooth w/ no play. The rims have a good bit of cosmetic damage, mostly from shuttle racks (all major marks pictured). Nothing goes deeper than surface level, and the actual sidewalls are in perfect shape (I am a very light rider)

Selling my Cascade Slab 4 piston mineral oil calipers hooked up to some Shimano XT BL-M8100 Brake levers. The calipers have been through 1 set of pads, the levers I have owned for longer, probably 2-3 sets. The levers have some surface scratches here and there, and the anodizing has began to rub off the rear lever, but otherwise they are in great shape. The calipers are absolutely pristine. Just bled both before pulling off my bike with Motorex mineral oil. Selling these because they do not work very well in cold conditions: Under ~40 degrees the lever will feel very stiff. They still function fine, but I do a lot of winter riding in Washington and got something that is more consistent in cold climates. If it is not cold out, they are extremely powerful and consistent, and I'll really miss the lever shape of the XT's. Will come with 1/3 worn EBC Red pads. These came off my XL Status, so there should be enough brake line for you. The rear is ~5ft the front is 2.5ft. The rear has some bends and scratches nearer to the caliper from internal routing, nothing I would be worried about.

For sale is a very lightly used set of Profile Elite MTB Cranks. Ti spindle, 104BCD spline drive adapter, BB92 Bottom bracket included but would work with any other 22mm BB. I have very long legs so these are 177.5mm in length. Great for a SS, hardtail, etc. Original box included of course, Photos show how lightly used these are. Maybe 150 miles on them. BB bearings are butter smooth.