MegaMixTapeMax

2020 RockShox Sid 29 120mm RL Just had 200h service Some marks on fork legs but stanchions are perfect Steerer is cut at 184mm; came off my XL Epic Evo for reference. Remote lockout but I was using without as the default setting is open. Super efficient so didn’t require a lockout! Any questions, let me know!

2017 Santa Cruz Hightower CC 29 bought in November 2017 from new. Invisiframed from new. SRAM XO1 Eagle - Brand new rear mech SRAM Guide RSC brakes SRAM X1 carbon cranks Santa Cruz carbon bars cut to 770mm, 35mm clamp Burgtec Enduro stem 50mm KS LEV Integra seatpost 150mm, Southpaw lever Rockshox pike RCT3 140mm Rockshox Monarch RT3 WTB ASYM I29 rims on Hope Pro 4 hubs Frame bearings and bushings replaced in February, has hardly been ridden since May due to getting a new bike. This has been the best bike I have ever owned, and I’ll be sad to see it go. Reason for sale is I’m doing a season in the Alps and need a bigger travel bike. As you can see in the photos, there is some cosmetic damage as to be expected, especially on the downtube, it has not damaged the carbon, only the paint and the invisiframe. Was caused from sitting over the tailgate of a pickup with a thin sheet between the frame and the tailgate. Pedals and bottle cage not included Bike will be serviced before sale Will not post, collection only No trades

For sale is a 2015 Rose bikes Uncle Jimbo that I bought second hand in March 2016 from the UK sales rep for Rose Bikes. The previous owner had only owned it for 8 months before. The bike is in good general working order. I have been told by a qualified mechanic that the rear brake lever would need new internals, which cost about £18. As expected, with it being a bike that has been ridden regularly, there are some scratches and rubs on the frame. Happy to send more photographs on request. Within the past year, both the rear shock and fork have been serviced, the rear shock being serviced by Mojo, as it needed a new aircan. The following have been replaced this year: all the frame bearings, bottom bracket, headset, chainring, chain and cassette. Also included in the sale is the mudguard as well as the tool needed to remove the E.THIRTEEN bottom bracket. The bike rides really nicely and is pretty much silent on the trails. It climbs very well and descends even better. The spec of the bike is as follows: SRAM X01 shifter and rear mech (new inner cable about 2 weeks old) FOX 36 TALAS (130mm-160mm) KASHIMA (slight mark on one of the stanchions, however, does not effect performance, as stated by a suspension technician) FOX Float X KASHIMA rear shock (165mm) ROCKSHOX Reverb Stealth (125mm) SRAM Guide RSC brakes (200mm front, 180mm rear) Mavic Crossmax Enduro Wheels RACEFACE ATLAS bar and stem E.THIRTEEN TRSR crankset and bottom bracket SDG BEL AIR Saddle Schwalbe Haans Damph trailstar snakeskin 2.35 front tyre (only ridden twice) Specialized Purgatory 2.3 rear tyre (both front and rear are set up tubeless)

For sale is a Hope PressFit 46 stainless steel Bottom Bracket 73 mm. Reason for sale is it turned out to be the wrong size, and my local bike shop had already thrown away the packaging, so I could not return it. All of the bearings are in factory condition. The bottom bracket is for a PressFit 46 frame, and will take a 30mm crank spindle.