Peytohc

Bought new in the fall, and rode a bit over the winter but it was too big for me. Has had ride wrap for all of its life, take it off and the frame will seem brand new. Send me any messages you have Willing to ship, buyer pays shipping

2017 29er specialized enduro size large. I bought this at the beginning of the summer from an older gentleman and ended up riding my hardtail all the time instead. I’ve put more money into it then time riding it and I’d just like it in a better home. Hopefully you feel like you score on it. I put on new bars and stem to get in a better position- 40mm stem and 800mm bars new maxxis DHF up front, and a brand new maxxis aggressor in the back. The drivetrain was quite worn, so I replaced that all. New race face chainring, sram chain and cassette, and new derailleur. A note on the derailleur: I had a brand new fancy XTR derailleur laying around, so I put that on. It’s still connected to a nx shifter, but a link modifies the pull ratio so it shifts like it should. Come give it a spin and you’ll see. Normal maintenance was done as well, and I had a full service done on the fork and shock within the last few rides. I’m open to shipping, and I drive between flagstaff AZ and SLC Ut if you live on the way and want drop off I know it’s in need of a wash, I’ll have it tuned by a local shop before it goes Buyer pays shipping Shoot me a message with any questions

letting this bike go. It is a ridged single speed, built frame up from a DCB ultralight frame. It comes in around 18lBs (with pedals and everything) but is more then trail ready. I've taken it through everything in Flagstaff, Sedona, and through races like Breck Epic and 25H of frog hollow. All is to say that is about the lightest trail ready bike you could get, but it would still be more then happy getting converted to an gravel bike or backpacking rig. If it means anything to you, this has been mechanic owned. I've certainly been taking good care of it and have trust in it, not that theirs too much to maintain. (a good thing hopefuly) Components: DCB Ultralight frameset. (DCB is a company out of Atlanta Georgia making carbon components. I've had great luck with their customer support if need be, but I've also owned three of their frames without any issue.) PNW loam dropper 125mm travel. Absolute black 18t Cog. Raceface affect R crankset. Raceface 32t oval chainring. I have a round 34 and round 32 I would be willing to give to you as well to mix up gear ratios or convert back to a round chainring. Sram Level TL brakes, with upgraded aluminum pistons to stop them from ever sticking. Sram 180mm F 160mm R rotors. DCB wheels Maxxis Aspen 2.4 F and R, though I'm willing to through in a a set of almost new maxxis rekons, 2.6 and 2.4 Squid Cycles EBB for chain tension, I replaced the BB bearings within the last 25 miles as well Eggbeater 3s are on their currently, I'm willing to through those in if their your type of pedal. I am open to shipping the bike if needed. Let me know if you have any questions. Also Open to Offers