UglyYeti

Quiring, hand built in Michigan, est 2005-2010? I’ve owned this bike about 7 years, I don’t know the earlier history. I’m 6’ and this bike has always been a little large for me even as a commuter - it’s a quite big. The paint job is incredible - very deep blue with tons of prismatic sparkles. Logo panel is pink-orange-yellow fade. Paint is in excellent good condition for its age - no scuffs or scrapes. I’ve clear wrapped with 3M wrap. I’ll include an automotive touch up paint that I’ve used sparingly around the dropouts to prevent rust. Horizontal dropouts with a derailleur hanger - can be run geared or single speed. Includes post mount adapters for the ISO mounts. Full length brake hose guide, cable stops for shifters. Navy Chris King headset. Includes both standard crown race and the +10mm race pictured. The +10 slackens the head angle from 72 to 71.2 degrees. Also includes a 100mm 31.8 Thomson stem with a blue face plate. Spacing 135 rear / 100 front HTA 72ish. 71.2 with the +10 crown C-T 560 C-C 505 ETT 625 ATT 610 Wheel Base ~1120 BB 68mm BSA Seat post 27.2 Seat clamp 30.0 Steerer 1-1/8 * I don’t have a build sheet - these are good faith hand measurements. Unsure of the tubing specs, but frame and fork are both steel. $575 includes frame, fork, Thomson stem, King headset, Salsa seat clamp and unbranded aluminum post. Will ship at buyer’s expense or pickup in Charlotte, NC.

2021 29” en315c, 24 hole Hydra Hubs Boost 15x110, 12x148, MicroSpline We Are One Carbon Rims 31.5mm inner width Level 3 Customization 220lb max rider weight Hubs are Pink with Black, Blue and Turquoise spokes. There’s some light fading to the hubs that can be seen on the rear hub where my speed sensor was mounted. I’ve owned these since new in Jan 2021. I have a few bikes so these haven’t gotten full time use. No damage or gouges. Only a few very light scuffs in the rims from normal use. I run 2.6” tires so they’ve been well protected. $1450 shipped to the lower 48.

Cotic FlareMAX, size Large, Syd Blue, Gen 4 UK Launch Edition - front triangle hand built by Five Land Bikes in Scotland 853 Steel, 125mm rear travel, Cane Creek DBAir, aluminum chainstays Clear wrapped, some minor paint touch up with factory paint (included). Frame is factory E-coated inside and out for rust protection. Complete geometry, specs and videos… https://www.cotic.co.uk/product/flareMAX About Five Land and their fab process… https://fivelandbikes.com/what-we-do Frame only equipped as-shipped from Cotic with Hope Seat Collar and Cane Creek shock, plus a custom Rock Guardz carbon downtube protector. (Full bike pic for info only, no additional build parts available.) The UK built frames, when available, are a few hundred £’s more than Cotic’s Taiwan made production frames. The Cane Creek DBAir was a £200 up charge from stock. It’s been a really fun bike - just a hair long for me. Replaced it with a Reeb SST. $1450 shipped to the lower 48. Spare Cane Creek DBAir shock available for another $200 if you want it.

FUNK Cycles La Ruta Size Large 29” or 27.5”+ 60mm pivotless rear travel Frame includes Factory Serviced Fox Rear Shock, 125mm Fox Factory External 30.9 Dropper, Salsa Seat Collar and 2 Degree Works Components UK Headset Built in Dec 2019 by Craig Sata in Fort Collins, CO Specs very close to FUNK’s standard size large. I can send you a pdf of the as-built CAD drawing. https://www.funkcycles.com/275plus29laruta Update: I’ve added the drawing to the pics. I deleted the under downtube bottle mount on the final build. The head tube with a standard 44mm headset is 70 degrees with a 120 fork, measured 69.4 with a 130. Included is a Works Components UK 2 degree offset headset which slackens the angles to 68 and 67.4 depending on fork travel. I rode this frame all of 2020, then had Craig build me another a bit longer and slacker that better suited me. It’s been hanging up for 2 years. Craig is no longer with FUNK, but he built more of these than anyone over 17 years. His welds are beautiful. Checkout his bio on satabikes.com. I still ride my newer La Ruta as my primary bike. The frame is currently bead blasted with custom blue/purple/pink fade anodized logos. There’s a few minor scratches and cable rub but your cables will probably rub the same spots. No dings or dents that I’ve found. The great thing about titanium is it’s a blank slate - you could have a shiny new scotch brite finish in an hour, or have it bead blasted again and use vinyl decals. I have the FUNK logo templates if you want to refinish with vinyl decals. There’s no internal dropper routing as the under top tube cable routing really cleanly suited an external dropper. I’ve added pics of a 29x2.6 Forecaster with the Paragon sliders pushed all the way forward and all the way back. I run my other La Ruta all the way forward with these tires with no clearance issues. Frame was $5k new with the curved tubing options. Will ship within the lower 48 for $2,500.