UpandatemRX

Up for sale is my Shimano XTR M970 Front mech. I used this for one year on my bike and it's in excellent condition. It has very little indication it's ever been used at all. There is some light marks in the cage where the chain rubs when shifting but thats the only wear. It comes with the clamps for the varying seat tube diameters. It also has a non-stock high limit screw because it was used on a dual chainring set up where it required a longer swing range than stock. Only reason I'm selling it is because I bought a Sram Red and have no need for this one. Also be sure to check out the other gear I'm selling on here. Message me with any questions! Buyer pays all shipping costs. Thanks!

Up for sale is my Chris King 1 1/8" Ti NoThreadSet. I used this set for one year on my bike and it's in excellent condition. It's never been crashed and has very little indication it's ever been used at all. There is some markings on the cups from being installed but once its in a bike you could never tell its a used headset. The bearings are smooth as butter (obviously, they're CK!). Ti prep was used so installation and removal was done without issue. Only reason I'm selling it is because I bought a Tune BoBo and have no need for this one. Also be sure to check out the other items I'm selling on here. Top cap and bolt are included. This thing is a head turner believe me. It got more attention than anything else on my bike and it's a headset! BE SURE TO USE TI PREP WHEN INSTALLING IT. ***DOES NOT INCLUDE KING BASE PLATE*** Claimed weight on the King site is 102g (slightly heavier than the Alu version but you pay for the 'cool factor') I don't believe I ever weighed this set to confirm that though. Message me with any questions! Buyer pays all shipping costs. Thanks!

Up for sale is my FSA K-Force Carbon Flat bar. I used this bar for one year on my bike and it's in excellent condition. It's never been crashed and has very little indication it's ever been used at all. There is some light marks in the clear coat where the brake and shifter clamps were as well as a light clear coat scratch on the right side (under where the grip would be). It's never been cut and the all clamps used on it were torqued to spec. Only reason I'm selling it is because I bought a New Ultimate bar and have no need for this one. Also be sure to check out the FSA OS-99 stem I'm selling on here. From the FSA site: • Ø31.8 x W600mm • 6° back sweep, 0° up sweep Approx weight is about 130g when I weighed it if I remember correctly. Message me with any questions! Buyer pays all shipping costs. Thanks!

Lightly used FSA OS-99 Stem in 100mm length. This stem was used on my bike for one year however I bought an Extralite and have no need for this one. Claimed weight is 113g for the 100m length I believe but I personally weighed this one at 107g. I always used Ti prep on the bolts and torqued them to spec. No cracks, chips, or dents. There is a bit of a scuff/scratch on the face plate that you can see in the pic. ***As you can see in the pic, only 5 bolts are included so it's missing ONE BOLT**** From the FSA site... • 3-D Forged and CNC machined from AL7050 • 4 bolt sculpted SL faceplate • Titanium hardware SIZES • ±6º x L80, 90, 100, 110, 120, 130mm • Ø31.8mm handlebar clamp diameter • 40mm fork clamp stack height FINISH • Black anodized, machined finish • Flip flop color graphics WEIGHT • 113 g (100mm) Message with any questions. Buyer pays all shipping costs. Check out my other items on this site too!

Used this cassette on my set of training wheels. Tons of life left on this as it was only used for about 500km. Excellent condition, no broken/bent teeth or other signs of excess wear (as you can see in the pics). Asking $20 + shipping. Will ship anywhere.