adamclark66

Deda Elementi Superzero RS carbon handlebar. Excellent condition. These have been well looked after with no structural issues or crashes. Visible marks are purely cosmetic from previous mounting (lever clamps and tape residue) and will be completely covered once installed. Used with mechanical shifting, so perfectly find for 4 cables routed through the bar. AI Generated description, The RS series is Deda’s most innovative production, using a stiffer and lighter carbon layup than the standard Superzero to deliver pure racing performance. This version features the updated RHM-EVO shape, which has a more compact 120mm drop, allowing you to stay in the drops longer with much better comfort. It also features the DCR (Deda Internal Cable Routing) system, making it perfect for modern disc-brake bikes with fully integrated cockpits. Key Upgrades (RS vs Standard): Lighter & Stiffer: Specialized high-modulus carbon construction. RHM-EVO Geometry: 120mm drop (vs 130mm) for a faster, more ergonomic hand transition. Premium Finish: Sleek "Polish on Black" (POB) graphics. Specifications: Width: 420mm (Outside to Outside) Shape: RHM-EVO (Rapid Hand Movement) Clamp Diameter: 31.7mm (Compatible with all 31.8mm stems) Reach / Drop: 75mm / 120mm Weight: Super light (approx. 210g–215g) Compatibility: Full DCR internal routing (up to 4 cables - how I used it) or semi-internal routing.

My used Fox factory 36 for sale. - 172mm steerer with star nut fitted. - GRIP2 Damper - Kabolt - 44mm offset - Kashima - 15mm boost - 150mm travel - 29" wheel - has 2 tokens fitted and I have 2 spare tokens Lowers are in good condition, but there are a couple of scratches/marks in the sanctions, which I have highlighted in the photos. There are some marks on the rebound cap. Relatively new mudguard. Invisiframe fitted. This was run on my nukeproof reactor frame, which I am also selling. Great fork, but I'm only selling as the steerer was too short for my new frame. Message me if you want both frame and fork and I'll give you a price for both together.

Up for sale is my Nukeproof Reactor 290 Carbon frame in size Large. It's been a great bike, but changed frame 18 months ago and now its time to pass this (and the fork) on. Size: Large (130mm rear travel). Wheel Size: 29" (290). Shock: Fox Float X Factory Series (Kashima). Serviced by TF Tuned in June 2024, but I haven't ridden this bike for 18 months. Protection: Full InvisiFRAME kit applied from new. Extras Included: Nukeproof seat clamp, rear axle, Nukeproof Headset (although the bearings are okay, but I would replace it if I was keeping it), spare mech hanger Condition: The frame is in great structural condition with no cracks or carbon damage. It has been ridden, so there are a few cosmetic signs of use: The InvisiFRAME has done its job, though there are some typical scuffs on the protective film. There are a few paint chips and scuffs which are all visible in the photos. The Fox Factory shock stanchion is clean with no scratches. I ran a 2.6 dhr II on the back, for the right price, I will include it in the sale. I ran a 150mm Fox 36 Factory on this frame, which I am also selling. If you wanted both, let me know and I can give you a price for both together. I have left the cable outers in for the new owner to run new ones through. **Seat post not included in sale** May consider posting, message me if you you're interested.

Free Maxxis DHR II 29X2.4 MAXXTERRA, 3C , EXO+ Used, but life left in it. Pinch flatted & won't seal tubeless any longer, absolutely fine with a tube in it. Collection from north Bristol. Hoping it will be useful for someone out there...

Burgtec WideRide Enduro Handlebars - 800mm wide (uncut) - 35mm clamp - 9deg backsweep - 5deg upsweep - 30mm rise Used condition with some minor scratches/scrapes as per the pictures. £30 collected, £5 posted within the UK.

70mm Reserve Fillmore Tubeless Valves Bought these for my 50mm rims as I didn't want a huge value, but the sizing advice is correct, they are only good for a 48mm (probably less) rim. These are brand new, with me only trying one valve in my rim. I paid £40 for these. £30 collected from Bristol - message me if you want them posted.

Brilliant bike which I have owned for the last 12+ years. Excellent working order, ready to ride, I just don't use it much any longer, so it's time to go to a new home. Size 57cm aluminium frame (large). I'm 6ft and fits fine. Aluminium/carbon fork with plenty of length on the steerer to move the bars up/down. 10 speed Shimano 105 (5600) groupset 50/34 crank FSA headset Tektro R710 calipers SCOR MKIII bars (prologe tape), stem, seat post and saddle Prolite wheels and rims with QR Skewers 23c continental gatorskins No pedals As expected with a used bike, there are a number of small chips. The inline barrel adjuster doesn't stay set, so you to adjust it when riding. This can easily be removed if it causes to much trouble.