Block user

Recent

andrewbn42 dariodigiulio's article
Mar 5, 2024 at 21:39
Mar 5, 2024
Vittoria Releases Completely Redesigned Air-Liner Tire Inserts
@ksilvey10: how does the foam of the enduro compare to cushcore or original airliners?
Added 6 photos to Buysell
Dec 14, 2023 at 22:34
Dec 14, 2023
Selling
Dec 14, 2023 at 22:33
Dec 14, 2023

Industry nine nextie wheels

$750 USD
These nextie wheels are built on the sweet industry nine torch hubs. I like the way they sound better than the hydra hubs, and they are bomber. Rims have some scratches and dings visible, but wheels are true and round, and good long use. Rims are 30mm internal width, so they are well suited to running large tires.

Selling
Dec 14, 2023 at 22:23
Dec 14, 2023

Rocky Mountain bar and stem

$50 USD
50 mm stem with 780mm bar. Bar has about 20mm rise. New take off

Added 5 photos to Buysell
Dec 7, 2023 at 18:53
Dec 7, 2023
Added 26 photos to Buysell
Dec 7, 2023 at 17:58
Dec 7, 2023
Selling
Dec 7, 2023 at 17:53
Dec 7, 2023

Multiple sets of Psimet handbuilt tubular cx wheels

$250 USD
I have gravitated away from cx racing, and don’t have 2 bikes anymore, so I don’t need these wheels. There are 4 sets below, priced differently. If you would like more than one, contact me. There are also different rotor combinations available, and I have 11 speed and eagle cassettes that can be added. Rotor sizes160mm and 140mm, can be swapped out to the extent of what I have. I also have several sets of unmounted tires that I can include. If you would like wheels stripped and new tires mounted, I can do that for a price. Prices below are with rotors and no cassette. Set 1: $250 Currently have well used challenge limus. You could try re-gluing them, but I’d recommend against it. Wheels just had bearing replacement, so spinning nicely. Current rotors 140 front and rear Set 2: $300 currently have baby limus. Glue should be touched up before racing, but tires still have life in them. Had some bearings replaced this year and haven’t been used since. Current rotors 160 front and rear I can do the glue repair if you would like. I have been gluing tubulars for 10 years, and only had 1 roll. Set 3: $300 Set up with chicanes. One of the tires is cut, and wobbles badly, but the other tire has only 5 races or so, so is in good condition. I can touch up glue on that one if it is needed. Current rotors 160 front and rear Set 4 $350 Set up with specialized tracer tires. Only used a few times. Both tires in good condition, and re-glued for this year. Rotors currently 160 front and rear Tires available: All new and unmounted 3 specialized tracers $50 each 2 challenge chicanes $60 each 2 challenge limus $60 each.

Added 4 photos to Buysell
Dec 2, 2023 at 15:55
Dec 2, 2023
Selling
Dec 2, 2023 at 15:54
Dec 2, 2023

Xx1 Eagle boost gxp crank and BB

$210 USD
Lightly used crank, chainring, and threaded bottom bracket. These cranks were just replaced by a quarq. The bubbles are just a crank protector, and can remove it to prove it, but crank protectors are good things 175mm cranks, 38t chainring I have a couple other chainrings that I could swap

Selling
Nov 29, 2023 at 18:30
Nov 29, 2023

Team edition Roval control Sl wheelset

$1600 USD
These team edition control SLs are in good condition, and only used for a few hundred miles. They also have Fox compatible end caps, which don’t come with most sets as most of the bikes they come on have Rockshox suspension where they come with torque caps. Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook 4mm FlatTop design. Compatible with tire inserts. Rim Width: 29mm internal Front Hub: Alloy body, 15mmx110 thru-axle, 19 and 31mm OD end cap options included. Max Rotor Size 200mm Front Spoke Pattern: DT Swiss Aerolite Straightpull 294mm, 24-hole, Two-cross Rear Hub: CNC-machined alloy body, SiNC Ceramic Bearings, premium-quality DT 180 internals and 36t quick engagement ratchet system cassette, includes SRAM XD Driver and 148 end caps. Max Rotor Size 200mm Rear Spoke Pattern:DT Swiss Aerolite Straightpull 294mm, 24-hole, Two-cross Bearing Type: SiNC Ceramic Sealed cartridge Nipple Type: DT Swiss Pro Lock Hexagonal Alloy 14mm 2.0mm Total Wheelset Weight: 1240g System Weight Limit: 275lbs / 125kg

Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.023877
Mobile Version of Website