arialtier

Freshly rebuilt (by Missoula Bike Works) Fox X2. Eye-to-eye: 8.5" (216mm) Stroke: 2.5" (63mm) It's got a 22mm mounting bushing with it. Came off a 2016 SC Nomad. It'a in almost immaculate condition minus a tiny, pin-sized blemish in the kashima coat (see photo).

Brand new 2022 Code R brakeset. Complete with rotors and a few odds and ends SRAM supplied. These came off of a 2021 Nomad build.

2014 Specialized Allez Expert with Smartweld frame. It's a 54' and is in excellent condition. It has the following components: FACT Carbon fork Ultegra wheels Ultegra drivetrain Ultegra brakes S-Works carbon cranks Toupe expert seat This bike is extremely light and stiff. It's in great condition. Willing to ship withing the U.S. Buyer pays shipping and Paypal fees.

Santa Cruz Nomad CC in good condition. Nomad CC Medium Frame. Has some paint scratches but overall in great condition. Pike Rct3 (New seals and damper) Fox DHX 2 with 300lb spring (have 350lb Fox SLS spring for $50 extra) RS Reverb 150mm Dropper Post (Freshly rebuilt. Does have some scratches that don't seem to affect performance. see photos below) Shimano XT 2 piston brakes. 203mm front rotor (with bleed and new pads) Shimano XT 11sp shifter and derailleur (new cable, housing, and clutch rebuild) Shimano XT cranks Wolf Tooth 32T front ring Easton Havoc Carbon bars Thompson stem Easton ARC 27 rear wheel with DT 350 hub WTB i23 front wheel with DT350 hub WTB Vigilante front & Trailboss rear I'll include a new WTB tire with purchase- Breakout. Frame bearings were replaced not too long ago and all of them have been recently greased. PM me if you want any additional photos.

2015 Santa Cruz Highball, Aluminum Frame, size SMALL. This bike is super clean and has very little miles on it. $1000 O.B.O. I'm willing to ship within the U.S. at buyer's expense. Comes with: Fork - X-Fusion Slide 29" Brakes & shifters- Shimano XT Drive train - Shimano XT with 2x10 Wheels - Mavic Crossroc with Specialized Ground Control tires Bars - Easton Haven carbon, cut to 760 Seat & Post - Specilized Henge on a carbon Easton post Head set & Stem - Cane Creek with Thompson 50mm Elite Grips - Race Face Includes XT pedals

Brand-new rear wheel, never been mounted. 100x142mm hub spacing XD driver and spindle included (not pictured because I pulled it off for shipping purposes). If you want a full set, I have a slightly used front wheel as well.

Lightly used 2016 Kona Process 153, Medium frame. Specs are: Brakes: Sram Guide Ultimate (200mm rotors F+R) Bars: Jerome Clementz Carbon 750mm Post: RS Command post 150mm drop Fork: RS Pike 160mm Shock: Monarch Plus RC3 Wheels: Easton Havoc laced to DT 350's with WTB Vigilante both F+R Cassette: 11 speed E*thirteen Sram XX1 11spd derailleur With SRAM XX1 Shifter Cranks: E*thirteen E*thirteen chain guide WTB carbon hightail seat *Pedals not inclued This bike has been lightly used, there is no damage to the frame, except a minor paint scratch on the downtube from shuttling. I have brand-new Carbon E*thirteen wheels I can thrown on the bike for an additional $800.