bbbrugby

2011 Specialized P.1 Bike Frame Material Butted Reynolds 520 Cr-Mo Head Tube Diameter 1 1/8-inch Headset Integrated FSA Impact, 1-1/8" threadless, Campy type cartridge bearings Handlebar Butted 31.8mm alloy riserbar, 60mm rise, 8 degree back sweep, 6 degree up Stem SBC Aggro Stem, 3D forged/CNC, 4-bolt, 35mm length Brakes Rear only - Avid BB5, mechanical disc, 140mm G2 Clean Sweep rotor Brake Levers Avid FR-5, alloy, two-finger, linear pull Cranks 3pc. tubular Cr-Mo for 8 spline, 175mm length Chainrings CNC cut 6061, 25t, Motostar design Bottom Bracket Mid BB, 2x sealed cartridge bearing w/ 19mm 8 spline hollow Cr-Mo BB spindle, alloy tube and cone spacers Chain KMC Z510HX, 1/2" x 1/8", anti-drop inner links Cassette Single speed, Cr-Mo, 1/2" x 1/8" x 12t Hubs Front: P. Low flange, forged alloy, 3/8" bolt on axle with cartridge bearings, 36h. Saddle P. Combo, 1pc co-molded composite saddle and alloy seat post combination Seatpost Alloy, no offset Seat Post Diameter 25.4mm Seatpost Clamp Integrated w/ replaceable single bolt Rear Dropout / Hub Dimensions 10x135mm Colors Blue Upgrades I have are a marzocchi dirt jumper 1 2010 or 2011. I have two Spank Evo 35 rims, one i have on the front, the other is brand new tags still on for the rear just no hub yet. also i have the stock rear set up on the bike still. for both spank rims i have two WTP Graffiti SF. one of which still has the tag on. The front hub is new and laced in to the other Spank hoop and is a chrome NS Bike hub. I will ship but only if buyer pays for packaging and shipping