blairaltman meagerdude's article
Jul 30, 2019 at 20:44Jul 30, 2019
7 Protective Frame Tapes Ridden & Rated
@mkul7r4: 3M Scotchgard Pro film is what I used. Combine that with a hobby grade vinyl cutter and you'll get perfect fitting results that are better than RideCrap.
Added 11 photos to Buysell
Dec 15, 2018 at 10:12Dec 15, 2018
Jun 25, 2017 at 18:39Jun 25, 2017
Mechanic owned. Swiss army knife of road bikes. Fast on the pavement, super fun on smoother mountain bike trails, I have even done some touring with a trailer behind it. This is a bike that I can always trust to perform with the hydraulic brakes and electronic shifting everything just simply works and seems to never need tuning. This bike was built in 2014. It is a full custom build with a crazy parts package on it. The bike is in excellent condition, current drivetrain has low km on it. Specs: Frame: 2013 Crux Pro Carbon disc 52cm Wheels: Roval CLX 40 carbon disc with ceramic bearing and upgraded DT Star Ratchet for faster engagement Shifters: Shimano R785 Di2 Hydraulic Brakes: Shimano R785 with sintered IceTech pads Rotors: Shimano RT99 140mm IceTech Freeza Derailleurs: Ultegra 6870 (Di2, long cage rear) Cassette: Ultegra 6800, 11-32 Crank: Ultegra 6800 mid compact 52-36, 172.5 length BB: Praxis OSBB to Shimano conversion (to eliminate pressfit creaking) Bar: Pro Vibe carbon anatomic bend 42cm Stem: Pro Vibe UD Carbon wrapped 7075 alloy 80mm Seatpost: Pro Vibe Carbon Di2, 0 offset Saddle: Specialized Romin Evo Pro carbon rail 142mm width Pedals: Ultegra 6800 carbon Di2: Internally routed with BT-DN110 seatpost battery which allow for new Synchro Shift firmware (installed) and addition of D-Fly Tires: Schwalbe One 28c width very fresh, Maxxis Cormet 23c, Surly Knard 42c, Schwalbe Smart Sam 35c Bottle cages: Pro UD Carbon (x2) Fenders: SKS Raceblade XL Computer: Specialized Elite w/ barometric altimeter and temperature Excludes Di2 charger
Oct 10, 2014 at 23:33Oct 10, 2014
Oct 10, 2014 at 19:37Oct 10, 2014
Oct 5, 2014 at 22:01Oct 5, 2014
This is a custom build on a 2013 Specialized S-Works Enduro frame size small. The bike was built at the start of 2013 and barely ridden this year. It has a little over 1000km on it total. Owned and ridden by shop mechanic and is in incredible shape. Only has very minor cosmetic wear. The build is as follows: Frame: 2013 S-Works Enduro, Small, carbon Shock: Cane Creek Double Barrel Air Fork: 2013 Fox Talas 180mm RC2 w/ Kashima Cranks: XTR 980, Triple (24-32-42) Pedals: XTR Trail Cassette: XTR 10 speed (11-36) Chain: XTR Shifters: XTR Rear Derailleur: XTR Shadow Plus Front Derailleur: XTR e-type Brakes: XTR Trail w/ Goodridge braided lines Rotors: Shimano Icetech 203mm and 160mm, 6 bolt Hubs: Chris King ISO Disc Rims: Roval Traverse SL Carbon Spokes: Sapim CX-Ray Nipples: Sapim Brass Seatpost: Specialized Command Post Blacklite 125mm Saddle: Specialized Phenom Pro carbon rail, 143mm width Stem: Easton Havoc 35mm clamp w/ 50mm reach Bar: Easton Havoc Carbon 35mm, uncut Grips: ESI Racers Edge foam Tires: Maxxis Ardent 2.4 Attached photos are from when bike was new, only changes from photos are Easton 35mm bar and stem combo as listed in the specs above.
May 19, 2014 at 23:23May 19, 2014
Oct 19, 2013 at 20:24Oct 19, 2013
2012 Specialized Venge Expert 52cm Ultegra shifters and derailleurs FSA SL-K Carbon Cranks, Mid Compact, BB30 105 cassette, chain, pedals Roval Rapide AL35 wheels Full spec can be found here: http://www.specialized.com/ca/en/bikes/archive/2012/venge/vengeexpertmid-compact#specs Probably has less than 2000km on it, bike shop mechanic owned. Will be tuned and clean before selling. Bike is completely stock other than the 105 pedals, yellow Shimano cable kits, and Specialized Rib Cages. Could use a fresh rear tire. Will consider shipping.