capturecolorado

FasstCo comes to the mountain bike world from a long standing motocross background in making vibration damping handlebars to help with arm pump, wrist strain, and other hand/wrist related issues. This is their MTB version, lighter than the fully-aluminum option with carbon bar tubes. For years I was having issues with my hand and wrist fatigue on my bike, and finally got a set of these to try out. They work wonders, after some time with them I've decided to try their different sweep model and thus the need to sell this one. The bar is in mint condition, currently has the red elastomers installed, but I have the yellow and black included with the bar. Once set up correctly, the flexion is unnoticeable... And with time, so will it wrist pains! If you're experiencing the same issues I did, and are currently riding on 800mm bars, seriously consider trying going down in width. I did, and it helped a ton with my hand issues, as well as other shoulder pains. Bar clamp diameter: 31.8mm Bar width end-to-end: 760mm Bar rise: 25mm Bar sweep / upsweep: 8° / 5° These sell new for $499, asking $200 obo

In mint condition, used for maybe 200 miles of riding before realizing... Ugh, I think air shocks are more my style. The absolute best coil over MTB shock money can buy, yours for $450 less than retail AND no sales tax. (I'll even ship it for free, lower 48 only) Shock size: 205 x 60mm Spring rate: 475lb Bottom reducer: 30mm x 8mm Upper mount: trunnion standard ** Other spring rates and reducers available through Push to suit your specific bike / weight ** Built for a Transition Patrol carbon 2024 MY, but its size is 205 x 60 with trunnion mount, and will fit ANY bike that's designed around that shock size. Factory tune specs for other bikes can be found on the Push website. This shock is their current model, the S-series.

Used but not abused large TR11 is ready to rip, stock X01 DH build with code brakes, everything runs perfectly and it's ready for park season. Located in western Colorado, shipping available but would prefer local or regional pickup/meetup. Only selling because I don't spend enough time at bike parks to justify keeping it, it's the most fun DH bike I've ridden, but with limited time for parks, I feel guilty owning it.

Front and rear Shimano Saint brakes, rear brake line had to be cut to remove from the frame but I'm including a new brake line. I believe I have a fresh set of pads that I'll include as well.

Clearing out the parts bin, this 2017 Pike RSC 29 came off my Santa Cruz Hightower, travel has been increased to 150mm from 140mm, and I added the Vorsprung Luftkappe which gave the fork a lot better small bump compliance and way better mid stroke support. The internals and stanchions are in great shape, the exterior has seen some use... Scratches and scuffs but no dents or anything that affects function. Steerer tube is 7" long.

2020 Rockshox Pike RSC 27.5" 160mm, upgraded damper to the Push HC97 damper upgrade, I have the original RSC parts that I'll include. Fork has usual external wear and tear but stanchions don't have any damage, and it's a great riding fork with the compression upgrade. Steerer tube is 7-3/8" long, includes cane creek 40 crown race.