Block user

Recent

chasejj pinkbikeaudience's article
Dec 11, 2017 at 19:27
14 hours
2017 Pinkbike Awards - Advocates of the Year Winners
It is actually the complete opposite. The administration is in fact comitted to opening up federal lands to recreation of all types. Not just MTB's. They fundamentally are against Federal control when it is not serve a federal security purpose. Returning the BS Monuments back to the states is just a small way to correct the punitive policies and blatant land grabbing of previous admins. Get you facts straight.
chasejj pinkbikeaudience's article
Dec 11, 2017 at 15:21
18 hours
2017 Pinkbike Awards - Advocates of the Year Winners
Wow- Reason and logic displayed on PB comments. This is like a unicorn.
chasejj pinkbikeaudience's article
Dec 11, 2017 at 14:52
19 hours
2017 Pinkbike Awards - Advocates of the Year Winners
A more anti MTB corporation cannot be found than Patagonia. Hilarious. Liberalism is indeed a mental disorder.
chasejj RichardCunningham's article
Dec 1, 2017 at 7:44
Dec 1, 2017
Niner Files for Chapter 11 Bankruptcy with Pending Sale to Colorado Investment Group
@InspectorSnatchIt: On the contrary. I know them very well. read through and you will educate yourself. Chris Sugai's flowery comments would be very familiar on CNN,MSNBC and others. It's called fake news.
chasejj RichardCunningham's article
Nov 30, 2017 at 14:14
Nov 30, 2017
Niner Files for Chapter 11 Bankruptcy with Pending Sale to Colorado Investment Group
So what you are really doing is settling with creditors for pennies on the dollar to make the books better in a sale after the fact. So your Taiwanese frame builder, Rockshox, SRAM, Fox, Shimano and others are taking the hit?
chasejj paulaston's article
Nov 28, 2017 at 14:25
Nov 28, 2017
Pole Bicycles Announces New CNC-Machined 'Machine' - Press Release
@dualsuspensiondave: Dave- I have extensive experience with the EPA and in no way are they reasonable or just using common sense with their regs and enforcement. It has gotten way out of control and needs to scaled back significantly. Thank you President Trump. 30% cut of EPA's budget is a good start. This is leading to companies to run to asian countries to have virtually no safeguards. Not necessarily the right thing to do. Which is Pole's whole point, however their virtue signaling as marketing is very annoying. We can do it in the US but the combination of labor rates and prohibitive regulations kill the whole idea unless you want to pay $4-5K for a CF frame that sells for $3K from some 3rd world shithole. I guess you would just as soon crap on your neighbor to get that $1500 discount then?
chasejj paulaston's article
Nov 27, 2017 at 8:39
Nov 27, 2017
Pole Bicycles Announces New CNC-Machined 'Machine' - Press Release
@dualsuspensiondave: In fact the EPA does kill businesses before they even start. Ask any frame builder or manufacturing business who has looked into the possibilities of producing here. Mostly VOC regs kill it before it gets off Phase 1. I see you get real defensive about EPA on other threads. You must be one of them. A more arrogant and obnoxious bunch of bureaucrats has never been created. Hopefully we can get an additional 30% cut in their budget next year which should shrink it down to it's essential size for actually upholding needed regs.
chasejj paulaston's article
Nov 24, 2017 at 14:43
Nov 24, 2017
Pole Bicycles Announces New CNC-Machined 'Machine' - Press Release
@Waki- I actually agree with your sentiments in this rant. Well done. My attraction to this Pole is the hope it gives me that we in the US could do the same thing at somepoint and create something cutting edge and not cave under the EPA regs that kill CF production here in the US. I hate CF for 2 reasons. It seems to be virtually impossible to produce economically in anyplace but 3rd world shitholes, and the molds required and their cost make it a big compny only excercise and prevents innovation on sizing and geometry. Pole's virtue signalling is in fact bullshit.
chasejj paulaston's article
Nov 23, 2017 at 14:03
Nov 23, 2017
Pole Bicycles Announces New CNC-Machined 'Machine' - Press Release
Very likely my next bike! Awesome looking. Hope it holds together and weighs in at a reasonable weight for what it is.
chasejj paulaston's article
Oct 14, 2017 at 22:04
Oct 14, 2017
Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2017. Pinkbike.com. All rights reserved.
dv65 0.040952
Mobile Version of Website