Block user

Recent

Added 10 photos to Buysell
May 16, 2019 at 8:20
May 16, 2019
Selling
May 16, 2019 at 8:20
May 16, 2019

Devinci Wilson - Aluminum

$1750 USD
I am selling my beloved 2012 Devinci Wilson size medium. I custom built this bike from the frame up and have made many upgrades to it throughout the years. The bike has been well ridden and has its share of scratches, however, it still rides great without any issue and would be the perfect bike for laps at Northstar. The frame is still solid and there are NO dents. I am selling because it just doesnt fit me anymore, otherwise I would keep it if it did. It comes with many extras as I had a spare part for almost everything on it. I would like to sell it as a complete, since it is an older frame and would be hard to part it out. Please make me a reasonable offer. The components are listed below: Frame: Medium Fork: 2013 Fox Factory 40 with the FIT 4 Damper - (comes with different weight springs) Shock: 2018 Fox Factory FOX DHX2 Wheelset: Industry Nine - Enduro Front, DH Rear - Straight pull Aluminum spokes Tires: Maxxis Minion DHF Front, Minion DHR II Rear - Pretty much new (Front is setup tubeless, Rear has a tube but can be tubeless with a new tire, tire has a slight cut in it, but it is new) Brakes: Shimano Saint with 203mm ice tech rotors Rear Derailleur: Shimano Saint 9 SPD and shifter Cassette: 9 SPD Shimano Tiagra? Crankset: Truvative Descendant - 170mm Chainguide: Straitline Silent Guide with Aluminum bashguard Chain: KMC Gold titanium nitride Seat/Seatpost: SDG Carbon I-Beam post and Saddle Handlebars: ENVE Carbon DH Bar - Cut to 760mm Stem: Raceface Grips: Brendog Deathgrips **EXTRAS** - Shimano Saint 9spd rear derailleur - Truvative Crankset (has a pedal stuck to it lol, but still works fine) - Straitline Silentguide chainguide - Straitline AMP pedals - Xpedo flat pedals - Devinci Bearing service kit - Extra bearing hardware - Extra rear axle - Spare Atomlab Pimplite Wheelset - Studded 26" snow tires

Added 5 photos to Buysell
May 16, 2019 at 7:43
May 16, 2019
Selling
May 16, 2019 at 7:42
May 16, 2019

Lapierre Zesty Part Out

$1000 USD
I am parting out my 2016 Lapierre Zestsy. I cracked the frame and am unable to get a replacement anymore. Please make me an offer as I am unable to use these parts anymore. I will sell everything for $1,000 if it is bought all together. This would be a perfect kit to build up a nice XC/Trail bike. All components are in good condition and work great. Fork and shock were just serviced. The parts I am selling are listed below: - 2017 Fox Factory Fork 34 Float 27.5" 140mm Fit4 3Pos Adj 15x100mm - Steerer tube cut to 8 3/8" ($400) - 2017 Fox Factory Shock Float 120mm 3Pos Adj - 7.25 x 1.75 ($250) - 2016 KS LEV Integra Dropper Post 150mm travel Ø: 31.6mm - Lever and extra hydraulic cartridge included ($100) - Shimano Deore XT FCM8000CX66 Cranks - 175mm length crank arm ($90) - Shimano Deore XT BB-MT800-P Bottom Bracket - Brand New - ($15) - Shimano XT SPD Pedals - ($50) - Shimano XT RDM8000GS, 11-speed Rear Derailleur & shifter - ($50) - Shimano XT FDM8025ED6X, E-type Front Derailleur & shifter - ($20) - Shimano XT 11 Speed chain - Have 2 chains, 1 new & 1 used ($25) - Shimano XT BR-M8000 - Front and rear brake set - will include ice tech rotors - ($125) - RACE FACE AEFFECT Front wheel - New WTB Vigilante Tire 2.3" - 27.5’’ 15x100 - ($50) - Stans Flow MK3 Rear Wheel with Hope Pro 4 hub - 12x142mm - New WTB Trailboss Tire 2.25" ($100) - Lapierre Handlebars with Lizard Skin Grips - Cut to 750mm - ($15) - EASTON EA70 Stem - 6° Ø: 31.8mm - 60mm length - ($15) - SDG DUSTER LP Custom Saddle - ($15)

dmarsh15 jamessmurthwaite's article
May 1, 2019 at 8:45
May 1, 2019
The Karpiel Armageddon Returns as a 29er Downhill Bike [Updated]
@qreative-bicycle: He rides an e-bike now..
dmarsh15 pinkbikeaudience's article
Dec 27, 2018 at 7:01
Dec 27, 2018
Tech Talks: Dropper Seat Posts - To Clamp Or Not To Clamp?
So does that mean you can clamp your fork stanchions too???
dmarsh15 sarahmoore's article
Nov 2, 2018 at 11:01
Nov 2, 2018
Fox Factory Plans to Move HQ from California to Georgia [Updated]
@Grmasterd: No its a terrible place, no one should come here...
dmarsh15 sarahmoore's article
Nov 1, 2018 at 21:24
Nov 1, 2018
Fox Factory Plans to Move HQ from California to Georgia [Updated]
@Grmasterd: Wonder what kind of jobs will be opening in Reno? Asking for a friend...
dmarsh15 AndrewTaylor's article
Jun 14, 2018 at 13:44
Jun 14, 2018
Video: Andrew Taylor Visits California, Nevada, & Utah - AT's Ultimate 48 State Road Trip
@AndrewTaylor: Did you actually do your research on this?
dmarsh15 AndrewTaylor's article
Jun 13, 2018 at 7:21
Jun 13, 2018
Video: Andrew Taylor Visits California, Nevada, & Utah - AT's Ultimate 48 State Road Trip
@AndrewTaylor: You may have seen videos, but none of them show the entrance like you did and then post it to the front page of pinkbike...Thanks for pulling it.
Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv56 0.075700
Mobile Version of Website