drbike

Comes with matching blue 120mm Fox 34 Stepcast, 44mm offset, GRIP Retail is around $4,000 USD for the frame fork, selling for $2285. 1 season of use. If you want to pay in Canadian funds and are in Canada, the price is $2900 If you don't want the fork, the price is $1785 USD or $2250 CAD. Suspension is working fine, but probably could use a service. Shipping is okay to USA/Canada, I can provide a better quote, but expect $150. Local pickup is okay. The inside of the chainstay has some scratches, must have picked up some rocks. Picture looks worse than it is. If this bothers you, then you should buy a brand new frame ;) Bike has never been crashed.

Brand new Ortlieb front and rear Panniers, includes both racks (Surly). It's possible the racks could be missing a piece, been sitting for a few years now. It looks like it's all there but I'm not going to guarantee, could send more pics if needed. Cost around $7-$800 of this kit. Again it's all brand new! Local pickup preferred but can ship at buyers expense.

Purchased NEW in September 2019 for my wife. It has some scratches on it, nothing crazy. Ridden less than 1000kms. With the NOBL TR41 carbon wheelset upgrade this bike would cost about $14,500 CAD Selling Price: 5800 USD or $7400 CAD. Local pickup preferred but I can ship it, shipping will probably cost about $150 Will install new icetech brake pads, bleed both brakes, and install a new XT "e-bike" compatible chain prior to selling. Onyx Racing Classic rear hub, ceramic bearings, infinite engagement and 100% silent, perfectly suited to e-bikes. Industry nine boost front hub. TR41 carbon rims, 34mm rear and 35mm front internal width. Graphics are removable, I could change to another colour or just go with the stock glossy black. Currently set up as 29" with nice 2.4" Michelin enduro tires, however the bike can be set up for 27.5" plus as well, in fact that's the stock configuration. I could potentially rebuild the wheels with 27.5" rims for the right buyer, or sell it with a secondary wheelset so you can run either wheel size. 29" tire clearance can comfortably clear 2.5" tires, 27.5" can comfortably clear 2.8". I bought this one over the "2019" model because it was the same frame, comes in black, I was going to swap to 29" carbon wheels anyway, it had the higher end steps 8000 Shimano motor, and also the integrated XT di2 kit. Basically it was better spec'd than the 2019... Full list of parts below: E-Bike Class 1: Pedal Assist Motor Shimano Steps E8000 Battery Shimano BT-E8010 Battery 500 Wh Modes Eco, Trail, Boost, and Walk Frame Carbon Fiber with molded composite motor casing and skid plate, 29" with up to 2.5" or 27.5 with up to 3" tire Rear FOX Float Performance Elite DPX2, 140mm travel Fork FOX 36 Performance Elite 29"/27.5"+ Boost, 150mm travel Bar. Phoenix Team Carbon, 35mm diameter, 760mm width Stem Phoenix Team Enduro, 35mm clamp, 45mm length Grips Phoenix Team Padloc Brakes Shimano XT M8020, 4-piston Levers Shimano XT M8020 Shifters Shimano XT Di2 11-speed (right) / Shimano Steps E8000 (left) Derr. Shimano XT Di2 GS Cranks Shimano FC-E8050 Hollowtech, 170mm length Ring. 34 tooth Pedals Raceface Chain 11-speed Cassette Shimano XT M8000, 11-46 tooth, 11-speed Saddle Phoenix WTB Vigo Pro Seatpost FOX Transfer, 150mm drop

Courtenay / Cumberland / Comox area pickup is okay, otherwise shipping is about $50. $1000 CAD. I believe it's considered a 2021 model, purchased at the end of May 2021, ridden once and decided it was too long of travel so I bought a smaller fork instead of buying a kit to lower this one. Steer tube was cut, see picture. Factory FLOAT 36, GRIP2 - Root Beer / 44mm rake / 160mm Travel