erikl1000

I haven’t ridden the bike much in the last few years just due to having other hobbies. It would be a fun bike for someone just getting into mountain biking as well as someone with more experience. The bike handles well for me at 5’10” and 195lbs. It’s definitely a little more playful than planted but has the ability to get through some fairly rough terrain considering that it’s a hardtail. I’ve been very meticulous about maintenance and everything is running smooth. Feel free to DM with questions or to set up a time to come see the bike. I’m off intermittently through the week and usually work weekends but have time before or after work so let me know. Buyer pays shipping. See pic for frame geometry. Components are as follows: Rockshox Pike RCT3 fork. Rebound, low speed compression and lockout adjustment. 140mm lowered from 160mm. Minor scratches on lowers but stanchions are perfect. Seals are good. No leaks. 27.5” Easton Havoc wheels(100mm front/142mm rear hub spacing), Havoc handlebars(carbon, uncut @ 760mm wide, 31.8mm clamp) and 50mm Havoc stem. Wheels are super solid and have needed little to no maintenance over the years. I tend to not be very abusive to my gear. 11 speed Shimano XT shifter, derailleur and cassette. XT brakes(dual piston not quad). Brakes were bled last season and have been used once or twice since. E13 TRS+ 170mm cranks w/ E13 bottom bracket. Race face lock on grips. Maxxis Ardent 2.4” tire on the front (not pictured). Schwalbe Nobby Nic 2.25” on the rear. Rocket Ron in the pics is gone. Set up tubeless and recently refreshed. These have been the lowest maintenance tubeless wheel/tire combo I’ve ever had. I have a brand new never ridden 2.4" Maxxis Assegai I can install for an extra $50 if you want. WTB Rocket saddle. Bike will come with fixed length seatpost. Dropper post in pic is gone. Bike comes with some generic flat pedals. Pedals in pics are gone. Pics show some spare parts that came with the frame, wheels and cranks. They come with the bike. I’m also selling a pair of Specialized 2FO clipless shoes in size 43.5. They have a BOA lacing system that is handy. $100 obo.

I bought the bike from Fat Tire Farm in summer 2020, rode it maybe 5 times at Sandy Ridge and another couple times since. I have another bike that I ended up riding more. I'd guess it has about 20 hours on it. I'm not particularly hard on my bikes and it shows in the condition of this one. The bike is stock aside from the 150mm PNW Rainier IR V3 Dropper with the Loam Lever and the Syncros fender. I put on the OneUp pedals and I added some mastic tape on the chainstay and some frame tape in a few different spots as well. These are the stock specs: https://www.norco.com/bike-archives/2020/sight-c2/ I have the Ergon grips that came with it. They're yours if you want them. The Crank Bros. Mallet E pedals are $50 if you want them. I switched back to flats. They're a bit older but are still in pretty good shape. I have the extra plastic inserts that came with them as well. I’m not in a rush to sell it, I just don’t use it much. I'm glad to answer any questions! Happy shopping! -Erik

The post came on a bike I bought new in July. I rode it 2 or 3 times, maybe 30 miles in all, before swapping it out for a PNW post that allowed me to reduce the travel by 10mm to get the perfect saddle height. No damage or malfunction. Just a little bit too tall for me even when run as low as it can go in the seat tube. 34.9 clamp diameter 170mm drop 270mm max insertion depth 721g post only 762g with lever Uncut cable included if you want it. No housing. I'll consider trades/trades with cash for One Up or Enve carbon bars(35mm clamp & at least 780mm width), 32 tooth oval chainring for 12speed XT cranks. I'd be happy to help answer any questions you may have. Thanks for looking!

bought it to replace a stock stem that looked like crap. used it for a few months. broke my neck. used it a couple more times and then sold the bike it was on. figured id use it in a future build but that isnt going to happen. bought the stem in 2012 direct from easton and its been sitting on a shelf since 2014 no scratches. bolts arent stripped. threads arent cross threaded. it basically looks new. details: 65mm long 1.5" steer tube clamp 31.8 bar clamp 0 degree rise only thing im looking to trade for is the same stem in 1-1/8" in anything 65mm and under. or haven or point one or something similar keywords: 70mm 60mm black light