flncco

I copied the exact spec. off the web for accuracy, and altered it for any new parts I put on such as a fresh rear tire, grips, and saddle. The bike was well maintained and really fun to ride. Let me know if you have questions. * Frame: SIZE LARGE- BallisTec Carbon front triangle, SmartForm C1 Alloy swingarm, Proportional Response Tuned, Ai offset drivetrain, ISCG05, PF30, Post mount brake, tapered headtube * Fork: Fox Float Performance Elite 34, 130mm, FIT4 Damper, 3-Pos adj., tapered steerer, 51mm offset * Headset: Fox Float Performance Elite DPX2 EVOL, 130mm, 3-Pos adj. * Rear Shock: Integrated, 1-1/8 to 1.5", sealed angular contact bearings * Axles: Front: 15 x 110mm Rear: 12 x 148mm * Rims/Wheels: Stan’s NoTubes Arch MK3, 28h, tubeless ready * Hubs: Front: Hollowgram, Rear: Hollowgram / DT internals / XD driver * Spokes: DT Swiss Competition, straight pull (Ai Offset dish - rear) * Tires: Maxxis Minion DHF 29 x 2.5" WT front, Aggressor 2.5" rear, 3C compound, Max Terra, EXO puncture protection, tubeless ready * Crankset: Truvativ * Chainrings: 30T * Bottom Bracket: Cannondale Alloy PressFit30 * Chain: SRAM GX Eagle, 12-speed * Rear Derailleur: SRAM X01 Eagle, 12-speed * Cassette/Rear Cogs: SRAM XG-1275, GX Eagle, 10-50, 12-speed * Shifters: SRAM GX Eagle, 12-speed * Handlebars: Cannondale C3 Riser, Alloy, 15mm rise, 9° sweep, 4° rise, 780mm * Tape/Grips: Locking Grips * Stem: Cannondale C1, 3D Forged 6061 Alloy, 1-1/8", 31.8, 0° * Brake Levers: SRAM Guide RS hydro disc * Brakes: SRAM Guide RS hydro disc, 180/180mm Centerline rotors * Saddle: 4D slim * Seat Post: Cannondale DownLow Dropper Post, internal routing, 31.6, 150mm * MPN: C23209M10LG

Selling my Santa Cruz Nomad. It has been an awesome bike, and surprised me many times with how nimble, and capable it is. See below for a full spec list, please DM with questions. As far as fit, all Santa Cruz bikes have a relatively short effective top tube, I am 6'1" and this bike fits me well, but i believe even shorter riders may like the fit. This bike is super lightly ridden, because I had two bikes and only built this bike 15 months ago. Frame: Santa Cruz Nomad Carbon Size XL (this was the year before they released the low-end carbon, so this is the equivalent of the CC) Fork: Fox 2016 Float 36 170mm travel (the Fox float has a 7mm lower A to C length and as a result is better in the 170mm for the Nomad than a 160 wich is 7mm shorter than a 160mm Pike) Shock: Fox Float X2 5 way adjustable Wheelset: Easton Heist 30 (wide light and purchased at the end of last season - less than 5 rides on them) Cranks: Raceface Turbine Handlbar: Raceface 6c SixC 780mm 35mm clamp Carbon Stem: Easton35 35mm length Grips: Raceface lockon Breaks: Shimano XT w/180mm rotors Drive Train: Shimano XT 11 Speed Seat Post: Fox Doss 125mm Dropper Sadle: WTB Volt Ti Tires: WTB Vigilanti - WTB TrailBoss (i will also include a set of fresh tires - WTB Convict)

Brand new frame with lightly used Sram/XO build-kit and extras. 2014 Specialized S-Works Fate size Medium/17" Reasonable offers only, let me know if you have questions. Will ship at buyers expense.

This fork was used half the season and has been sitting since then, need it out of my garage. Steerer has been cut, and it has been rebuilt regularly(once a month, by fox, at races, when it was being used) fork is 150mm travel, 3-position damper, 21-position low speed compression open adjust, axle is 15x100 QR through axle style. Steerer tube is cut to 6 11/16ths" This fork has the most modern version of the fox Float air spring with adjustable air volume tuning and very little breakaway friction for best in class small bump sensitivity. It is stiffer, lighter, more adjustable and performs better than the previous model most ppl know as the "CTD" model. Reasonable offers only.