grdn00

Excellent condition DHX2. Serviced in the summer and not ridden since. From a BC Edition rocky mountain instinct, but you can also use this to convert your 2021+ altitude to mullet without buying the MX link (cool trick!). SLS spring included

Excellent condition cane creek coil IL 210x55 shock. Fully rebuilt by Suspension Werx and ready to go - one ride since service and have full service writeup. This is an awesome, lightweight coil and was great on my rocky mountain instinct. Switched to an altitude otherwise I'd be keeping this! Also selling the DHX2 pictured - this was the BC edition shock 8.5 x 2.5 $300

Good condition carbon front wheel with a low-use Shimano 203mm rotor and a trail king front tire. Some scuffs from riding but no issues at all with the wheel. light, strong, 30mm internal width.

Brand new take off 170mm Fox 38 Factory 29inch 44mm. This will ship first week of April as I'm travelling for the next bit for spring break. I am not at home to take an actual pic of the fork right now, but it's a matte finish with stealth logos as comes specced on Altitude C70 Coils: https://bikes.com/products/altitude-c70-coil-22-23?variant=43474997412075 Steerer tube is uncut (came off an XL). I haven't unboxed the bike yet, but will be immediately swapping it for a 36. $740 USD (net of paypal fees) + shipping

this is a 153mm BC edition or 140mm regular edition Carbon 2018 Instinct frame. This frame is not going to win any beauty competitions, but it’s in excellent mechanical shape and would be great as a winter bike, or just an inexpensive entry point to a very light and capable trail/enduro bike. I had this built up variously as a 26.3 lb 140mm trail/XC bike, and a 30lb 153mm enduro all rounder. There are no structural or functional issues with the frame, but you can see the in the pictures the two obvious areas of paint wear: one on the seat tube where I had a tube strapped for a couple years and it wore into the paint, and the seat stay where heal rub wore into the paint. The rocky paint isn’t super resilient unfortunately and I should have ride wrapped this. Lesson learned. Anyhow, if you are fine with some less than perfect paint this bike is awesome. there are a number of small chips and marks especially on the rear triangle, but again zero structural issues. I should have ridewrapped! Includes: Frame and all necessary hardware Cane Creek Headset Race Face Bottom bracket (for 30mm spindle, installed in the fall) Pivots replaced last year Can include the Reverb and remote that’s installed. It’s a tad slow in return but still works great Shock Options: DPS Performance elite 210x55 for 140mm mode - included If you pickup local, at my asking price I’ve got a stem, a carbon Easton bar, probably a saddle, a used 10-42 cassette that I can include to get you on your way to a cheap enduro build. Optional Shocks: Cane Creek DB IL - 210x55 for 140mm mode - $450 extra (just serviced by Suspension werx) this is the shock that’s pictured Fox DHX2 Factory - 8.5 x 2.5 for 153mm BC Edition Mode - $300 Extra (serviced last summer, minimal miles since)