gregh

Hi there, Got my Size large Evil Wreckoning MB 29er up for sale. I brought the frame in April 2020 from Bike Tart and it's honestly been one of the best bikes I've ever owned, super reliable and rides amazingly. There a couple of marks from general use and being shoved in vans etc but it's mechanically spot on. She runs on coils both ends which are set for a rider around 75-85kg mark. I've been running it with a works components 2º angle set to give a 64º head angle. I've also been running micro shifts advent x 10spd drive train, works fantastically and lighter than the current XT drivetrain while costing less for a mech, shifter and cassette than the xt cassette on its own, worth bearing in mind for when you need to replace it down the line. Spec is as follows. Frame: Evil Wreckoning MB size large 29" - couple of cosmetic marks but structurally perfect, bearing were swapped in April, 2º angle set to give a 64º head angle Headset: Works components 2º angle set Fork: Marzocchi Bomber Z1 Coil 170mm, firm spring - Serviced by fox uk at the start of April Rear shock: Cane Creek DB coil with climb switch with 400lb SAR lightweight spring, should suit a rider around 75-85kg - Service by Sprung at the end of last year. Brakes: Sram Guide RE (Code) callipers mixed with Guide Ultimate levers Rotors: Shimano 203mm front and back Front wheel: Superstar V6 hub built onto a DT481 rim 29" 30mm internal width, plenty of scuffs but no dings, these rims are unbelievably tough. Rear wheel: Just riding along (bitex) hub built onto a DT481 rim 29" 30mm internal width, plenty of scuffs but no dings, these rims are unbelievably tough. Tyres: Kenda Hellkat 29"x2.4" AEC, I know people think Kenda are rubbish but these are mint check out the reviews Cranks: Raceface Aeffect 170mm BB: Raceface threaded -replaced in March Chainring: Works Components 32t Mech: Microsoft advent x 10spd- Replaced 3 rides ago Cassette: Microsoft advent x 10spd 11-48t -replaced in late march Chain: Sram 10spd - replaced in late march Shifter: Microsoft advent x 10spd Saddle: Fabric Scoop Seatpost: One up components 150mm dropper Stem: Nukeproof Horizon 50mm 31.8mm clam - brand new (could also swap this for a Span spoon 40mm stem if you prefer) Bars: Nukeproof Horizon 800x25x31.8 - Brand new Grips: Vitus lock on - Brand new Extras: Rock Shox Monarch air shock, there's a tiny scrape on the shaft but I've filled it with enamel and it maintains it's pressure. 4x new brake pads. 30t steel chainring. Front mudguard I'll be sad to see this one go as its been a fantastic bike but needs must. I'd prefer not to ship but if absolutely necessary I can (obviously in this event the bike is sold as seen) but I'd much, much prefer that the bike be viewed before purchasing, the bike can be seen near Risca or Raglan (where I work) in South Wales. Any questions give me a shout. Thanks Greg

Hi, Selling a set of Guide RE levers paired up with a set of Guide Ultimate callipers (the RE callipers got matched to the Ultimate levers on another bike). They'll need a bleed and probably new pads as they've been sat about in the garage for a while and I don't remember bleeding them after I assembled them. I'd recommend fresh pads, a bleed and lubing the pistons. I can't be bothered to do this myself hence the price, that being said they should make a good set of brakes if you're on a budget and happy to give them a bit of TLC. £55 posted Cheers, Greg

Hi there, Selling a set of Guide RE brakes, may need a bleed and new pads as they've been sat about in the garage for a year or 2. Prior to that they were working nicely and there's no reason why they shouldn't again. I'd recommend fresh pads, a bleed, lubing the pistons. I can't be bothered to do this myself hence the price, that being said they should make a good set of brakes if you're on a budget and happy to give them a bit of TLC. £55 posted Cheers, Greg

Hi There, Selling my Burgtec Penthouse MK4s, they're in good nick with a few of the usual battle scars but have probably only been ridden about 15 times so the bearing are nice and play free. They're currently sitting gathering dust as I've switched back to clips and don't see myself going back now. Asking for £55 posted to your door. Thanks Greg

Hi there, For sale is this bar stem combo Bar: Gussett S2 20mm rise, 35 clamp bars, 790mm width Stem: Title DM1 50mm, 35mm clamp direct mount stem £45 posted to your door, ideal for a cheap and cheerful DH build. Thanks Greg

Up for grabs is my Glory advanced 0 in size large. Spec is as follows. Frame: Giant Glory Advance 2016 size large 27.5 Fork: Fox 40 Factory 27.5, these have had a very small amount of material removed from the arch to accommodate a 29" front wheel, clearance is tight but I've been running it like this for over a year with zero issues Rear shock: Cane Creek DB coil with 450lb cane creek vault lightweight spring, should suit a rider around 75-85kg Brakes: Shimano Saints 220mm front rotor, 203mm rear Front wheel: DT Swiss 240 hub built onto a Stan's Flow EX3 29er rim Rear wheel: DT Swiss 240 hub built onto a DT FR 570 27.5 rim Front tyre: E13 Grappler DH MOPO 29x2.4 Rear tyre: Schwalbe Big Betty DH Ultra soft 29x2.4 Cranks: Shimano Saint with 36t narrow wide ring Chain Guide: MRP G2 Carbon Mech: Shimano saint Cassette: Sram XG-795 7 speed Chain: Sram 10spd Shifter: Shimano Deore 10spd Saddle: Nukeproof Vector DH (new) Seatpost: Giant Contact SL Stem: Nukproof Horizon Sam Hill 40mm 31.8mm clamp Bars: Spank Spike Vibrocore 770x30x31.8 Grips: ODI Longneck Condition wise everything on the bikes works great, all the bearing are free of play and feel in good nick, both wheels are pretty true and free of dings, both the forks and shock work spot on, the forks were lower lubed 4 rides previously. It has the usual battle scars from several years of use as you can see in the photos but it's all free of dents and cranks. If absolutely necessary I can ship it (obviously in this incidence the bike is sold as seen) but I'd much, much prefer that the bike be viewed before purchasing, the bike can be viewed near Risca or Raglan (where I work) in South Wales. Any questions give me a shout. Thanks Greg