illderbeast

One well ridden size small Norco range carbon for your consideration. This frame, fork and rear derailleur are OE and have 7 seasons on them, everything else is newer, rear shock is the next oldest part at about 6 seasons. Frame has a lot of cosmetic wear/tear as seen in pictures. It's been on a LOT of rides. Frame bearings were replaced years ago, and are not mint currently but still function, don't feel indexed, move freely. Anyway here's the parts: Lyrik RC: newer debonair air spring, (5 seasons) seals done in the last year, (I take extra good care of the seals with frequent fork boost lube, and cleaning stanchions after every ride). Stanchions are damage free. Lowers have scrapes, but also sick graphics. Rear shock: Fox DPX2 always been flawless, air can seals also in the past year, damper service performed by Alliecat a couple years ago, not past the 150 hrs on that. Works great no damage. Wheel set: DT 350 laced to race face offset 30, these came off bike that had limited use. And it was only a couple years old anyway, they seem great. Brakes: code RSC good condition rotors, recent pad change-pictured scratches on levers. Cranks: xo1 carbon 170s, limited use, I only rode them once, but they came off the same new to me bike as the wheels. Shifter: GX eagle pretty new. Derailleur: honestly kinda beat but it still works. I didn't want to run out and buy parts for this bike that I'm trying to sell cheaply. Dropper:reverb. 125 with awesome shifter style lever. Works mint. Saddle is mint sdg. Headset is brand new cane Creek 40. Dub Bottom bracket is brand new. Shift cable/housing is brand new. Tires are from my stash not new, but good condition and guaranteed full of sealant. Chain is recently changed, cassette is ok. 10-52

Free shipping 2019 steel frame shonky size short Built with take off pike rct3 650b set to 90mm so axle to crown is good. with recomended 42 mm offset as speced for the frame, ***pike DJ has a 40mm offset which is actually less than spec on this bike. Rs maxle.stealth front and rear-lighter and cleaner. Also has single speed dropout, an upgrade. Chris king headset Shimano xtr 9000 hubs Stans arch mk3 rims Double butted wheelsmith spokes Gx dub crank 165mm length 32t chain ring Rennen cog 13 tooth Magura mt 8 brake- carbon lever Pro taper bars 760mm Pro taper stem 35mm length Fizik tundra saddle Race face post Sensus swazye grips ****will not part out*** This bike has about 10 outings on it, dont want to sell it but i’ve accumulated too many bikes and this one overlaps my bmx.

This bianchi has been saved. It once had a damaged hanger which required a new drop out. I had one installed by a really terrific frame builder named Matt at Salt Cycles in SLC, UT. anyway, the frame is made from deda tubing, and is one of the lightest steel frames i've held. i decided not to paint over the repaired area, because i'm a real big fan of machines wearing their stories. ***the paint-whoever owned this (before getting a derailleur stuck in the spokes and trashing the dropout) before me apparently didn't like the celeste color and made it entirely blue, I wet sanded all that off, and actually quite enjoy the soft edge to the graphics, again this bike has a story, and a rough past, but don't we all. I built this up to my liking, and climbed some 16,000 feet on it, and maybe 400 miles, but i'm just not that pumped on road biking. Wheelset-fulcrum low spoke count pretty stiff. Shifters/hoods-Dura Ace 9000 Rear mech- Dura ace 9000 Front Mech -ultegra 8000 Brakes-ultegra 8000 Chain-dura ace 9000 Cassette-dura ace 9000-11-28 Cranks-ultegra 8000-165mm 50-34 Fork was a willier 45* but i removed the insignia-the fork could be nicer, but is solid. an enve 1.0 would be a smart look, or you could pick up a matching bianchi branded probably columbus fork for like 100$ bars are basic allu 42cm stem is a kona 90mm seat post and seat are nothing special, Yes I will include the ultegra pedals if you pay full price This storied high performance machine could be yours, or a loved ones!!