implainlazy

For sale are my wheelset off my downhill bike. The rear wheels is a Hope Pro 2 Evo 150 x 12mm hub, with a shimano freehub body, built on a DT Swiss Enduro E540 rim. The front wheel is a Hope Pro 2 Evo hub built onto the same DT Swiss rim. The front hub is a 20mm bolt through, 100mm non-boost. I've had these wheels for a number of years. Never had a problem with them. They could probably do with a spoke spanner ran round them to true them up a bit. The front hub is slightly rough on the bearings, been like it for years and never got any worse than when I first got them. The rear hub still runs lovely. All disc bolt threads are in excellent condition. No damage to any parts of the wheels. Included in the sale are a set of Hans Dampf tyres, tubeless fitted onto the rims. The tubeless valves are also included, so ready to fit and go. Tyres are both in good condition with plenty of life left in them. I am also including the SRAM PG 970 DH 9 speed cassette. I can remove this if you do not want it. Any questions, please ask. Viewing welcomed. I will post within the UK only. Postage cost £12. Paypal / Cash on Collection.

For sale is my Raceface Atlas FR SL direct mount stem, with original Titanium bolt hardware. This stem was fitted to my Fox 40's and was brilliant. The stem can be mounted either way up, one way will give a 50mm reach, and the other way will give a 30mm reach, very handy and tuneable to your bike and setup. Its very light (138 grams), and comes with the original titanium bolts which the stem was sold with. Bar clamp size - 31.8mm. If you'd like any more information, please message me. I can also post within the UK only. Cash on collection / Paypal accepted.

For sale are my Fox 40, RC2 forks. 26 inch wheel size. I have owned these forks for about 4 years, and due to commitments and change of bike these are no longer needed. Since owning these, I have had them serviced by TF Tuned around 2 years ago. Since then, the bike really hasn't seen much use at all. They still ride amazingly well, nice and plush, and all adjustments work as they should. These forks have preload, rebound, high and low speed compression adjustment. I have fitted an extra firm spring to these, and they ride really nice for me. I am a slightly heavier rider than normal, but I set my bike up to ride freeride rather than downhill, so these have never really had proper punishment over root sections etc. There are some signs of stanchion wear. They are not great, but they have never caused me any issues. The paint job on the lowers could be better, someone has painted these at some point. Again, not great but far from dreadful as well. They have no cracks or dents in the lowers, and the marks on the stanchions have never caused any oil leakages in the time I've owned them. I have changed all the bolts in the lowers and crowns as the heads were worn out. The 20mm axle is also usable, with the allen key head still in good condition. Steerer tube is cut at 150mm. If you have any questions, please get in touch. I can arrange postage to UK ONLY, please message for a quote. Cash on collection / paypal accepted.

For sale is my Mondraker Summum Pro Team, 2011 model. Medium, 17 inch frame. 210mm rear wheel travel, with a Fox DHX RC4 rear shock. I've owned this bike for around 4 years now. When I first purchased it, it had a complete overhaul. New bearings, new shock bolts, the shock was sent for a service and a headset. Since then, I've really used it very lightly due to life changes and not having time to get it out. The shock was sent to TF Tuned where, whilst being serviced, had a new Kashima coated shaft put in the shock. There was a very slight nick on the old one and I wasn't going to muck about. So basically, a very new shock now. All settings work well, holds air extremely well. The shock has High and low speed compression, rebound, bottom out control and an air piggyback. Very tuneable shock to everyone's liking. The shock currently has a 600lb spring on it as I basically built this as a freeride bike. Also included in the sale is the headset. I have left this in the frame, cable tied in the headtube. I have also left the gear outer in the frame as they are a bugger to feed through. I needed my rear hose line, but I have run a piece of string through to make it as easy as possible to fit your line. I also have, and will include in sale, the full geometry kit (specific to the pro team frame) and the carbon fibre shock guard as well. Frame as a 150 x 12mm rear end, 68/73mm bottom bracket width, and ISCG 05 mounts. If there is anything else you'd like to know about the frame, please do get in touch. I will ship within the UK, please message me for a quote to post it. Paypal / cash on collection.