joedaho

Custom Marin Alpine Trail XR - XL 29” Enduro Bike This bike is great. I’ve run it for a few seasons now and don’t really have a good reason to change it other than it was time for something different. A great example of how good geometry on a bike is free. Ridden on the good stuff in the sea to sky, then isn’t a total boat anchor knocking out a Pemby 50 or other long ride. Built up with parts that I like that work. ~$3500 ish new retail value on fork, shock and wheels alone. Located in highlands Squamish, in Whistler a lot but can meet up in anywhere sea to sky for a $100 time and gas deposit. Geo: https://marinbikes.com/en-ca/products/2023-alpine-trail-xr?srsltid=AfmBOorfoijt2rx5Yj7HytgrF_hXyU3OFzCYb0Mpz48h01J83fphZr3R Review: https://theloamwolf.com/reviews/bikes/review-marin-alpine-trail-xr/ Frame - 150mm Travel 29” XL Aluminium. Because metal. Brand new parts: Cast Greg Minaar Grips Pirelli Antagonist DH/Enduro 2.4” rear tyre Parts 100km of use Shimano 12 speed chain Shimano bb Shimano Deore mech One Up Switch 28t oval chain ring Rest of Spec: We Are One Union rims on Industry nine hydra hubs Maxxiss Double Down front tyre TRP Evo DHR Brakes front and rear 200mm TRP rotors Fox Factory 38 fork (still in service interval) Fox Elite DHX2 (the last ones they made that had the Fatal explosion habit fix) Deity Bar Deity Copperhead 35mm Stem Shimano XT Shifter SLX 170mm cranks One Up bash One up dropper post Fabric seat Chromag seat clamp

Surly rigid fork, 110x15 axle, IS mounts, 1 1/8 steerer (225 long) 485mm axle to crown, enough mounts to fulfil all your bike packing fetishes. Using a spacer to have fit 1.5" lower headset frames is pretty easy, Hope make a spacer available through NRG - any good bike shop will have an account. These are pretty hard to track down in Canada, it took me a while and then a build I was undertaking took a different route. Located in Garibaldi Highlands Squamish, will be in Whistler semi often when park opens. Open to shipping if buyer arranges and pays.