karter29

New OneUp Dropper 180mm x 34.9. Unfortunately I measured wrong and it's too long for me to use. Free shipping via UPS is included. Contact me with any questions.

Used 54cm 3T Strada Team limited edition Aqua Blue Sport replica. Super comfortable all road ride with room for 31mm tires. Feel free to contact me with any questions. Shipping available via BikeFlights. This was a frame up custom build using the following parts: Industry 9 wheelset (35mm front, 45mm rear) 31mm Enve tires (yes, they're 31's that measure 32 front, 33 rear). https://industrynine.com/wheels/road/i9-35-i9-45-f-r-combo/ 3T / ethirteen bailout cassette ( 9-10-11-12-13-15-17-19-22-26-32) that’s designed to run with a 40t or 44t chainring. SRAM Red eTap groupset. Rotor Flow single sided power meter crankset, QX1 chainring. Oversized Ceramicspeed OSPW pulley wheel system. New Selle Italia saddle. 42mm Enve SES aero bar with fresh Supacaz bar tap New 100mm Zipp Serice Course SL stem

New take off Fox Factory Float X2 from a 2022 Specialized Kenevo SL, 62.5mm x 230mm. Serial number: 1014539-0017-t Part number: 979-63-022. Please contact me with any questions.

Medium Bell Bell Super DH Mips convertible helmet in excellent condition. It was worn for a handful of rides but doesn't fit me very well. Feel free to contact me with any questions. Price includes shipping. From Bell: The Bell Sports Super DH MIPS Helmet is a full face mountain biking helmet with a versatile design that's packed with features for an overall better ride. Between its Float Fit DH technology, which gives you adjusting power in the form of a dial, and the MIPS Spherical protection, which reduces rotational energy in case of a fall, this helmet stays comfortable and protective no matter how you take on the mountain. The wraparound, tool-free removable chin bar helps you thrive on the trails but allows for a little extra customization. Venting along the brow as well as along the chin bar and helmet keep you cool as you start to work harder. And, for protection against odor-causing bacteria, this helmet features X-Static padding that quickly dries to keep the helmet fresher longer.

Lightly ridden 140mm 2022 Fox Factory 36 51mm offset, 15 x 110 TA Boost spacing, GRIP2 damper. This is a takeoff that has about five hours on it. There are a few nicks on the crown as shown but is essentially new (see images). The left leg leaves a trace amount of assembly grease but does not appear to be a blown seal as it is not wet and holds pressure as expected. Feel free to contact me with any questions. Price includes shipping in the Continental US.

Built up on a 2020 C frame using all new parts as of May 2023, the Fox 36 has zero rides on it. There is typical wear and tear from being ridden. Out front there is a new 140mm Fox Factory 36 with a zero rides on it. A 40mm TruVativ Descendant Stem, Specialized bars and grips round out the cockpit. The stock SRAM AXS Eagle shifter paddle was swapped out for improved ergonomics. All shock and pivot hardware were swapped from steel to titanium from Better Bolts. A second set is also included. The stock shock link was exchanged for a more progressive Cascade link. The stock link is included. A Cane Creek DB IL coil shock was fitted out back with four springs included (450, 500, 600, 650). With the 50mm stroke and Cascade link it's right around 130mm of travel. Specialized Butcher tires wrap a pair of Specialized take off wheels. The drivetrain is SRAM GX AXS Eagle with 170mm Eagle cranks. Rockshox Reverb dropper post. A Diety saddle (not shown) is included, cage is not. Feel free to contact me with any questions. Shipping is at buyers expense via BikeFlights.